AMP-F10 Stereo Power Amplifier
The Eversolo AMP-F10 is a powerhouse of a power amplifier, expertly engineered to bridge the gap between raw, explosive energy and delicate, high-fidelity precision. Acting as the definitive partner to the flagship Eversolo DMP-A10 Streamer/DAC/Preamp, it completes a world-class sonic and aesthetic stack. Designed to power high-end home audio and theatre setups alike, this amplifier delivers an incredibly immersive soundstage, robust low-frequency control, and an ultra-clean, whisper-quiet performance. The AMP-F10 was a well-deserved recipient of the Pursuit Perfect System "Essential Audition Award." Key Features: Massive Power Output: Delivers up to 320W per channel at 4 Ohms (200W at 8 Ohms) in stereo, and bridges to a monumental 950W at 4 Ohms (650W at 8 Ohms) for demanding setups. Dual-Channel Independent Linear Power Supply:Powered by a massive 1000W system that isolates channels to prevent cross-interference and maintain a balanced, expansive soundstage. Advanced DC Filtering: Eliminates low-frequency mains interference and transformer hum for an incredibly low noise floor. High-Current MOSFET Array: Uses 5 pairs of matched transistors per channel in parallel to ensure even current and ultra-low distortion. Exceptional Speaker Control: Boasts a damping factor over 600 for tight, articulate, and authoritative bass response. Premium Audio Architecture: Symmetrical design with dual differential amplifiers and negative feedback minimises noise. Flexible Connectivity: Equipped with balanced XLR and unbalanced RCA inputs for seamless integration into any system. Book a Demo: Experience the breathtaking dynamics of the Eversolo AMP-F10 firsthand. This amplifier is currently available for demonstration alongside the full Eversolo range at HiFiSound, Stockton.
The Eversolo AMP-F8 is a high-performance Class AB stereo power amplifier engineered to deliver exceptional control, expansive dynamics, and un-compromised audio purity. Designed to perfectly partner with the Eversolo DMP-A8 Gen 2 and DMP-A8 Master Gen 2 streaming preamplifiers, it forms a complete, ultra-clean high-end Hi-Fi system. Driven by a massive custom 800W linear toroidal power supply and featuring three pairs of precision-matched high-current BJT power transistors per channel, the AMP-F8 outputs a robust 180W RMS per channel into 8 ohms (280W into 4 ohms) and bridges up to a staggering 500W at 8 ohms. With classic dual analog VU meters, a damping factor over 400 for razor-sharp bass control, and an ultra-low noise floor, the AMP-F8 provides rock-solid authority to drive even the most demanding floorstanding speakers. Key Features: Perfect Partnering System: Designed to seamlessly complement the Eversolo Eversolo DMP-A8 Gen 2 and DMP-A8 Master Gen 2 for a sleek, cohesive, and high-performance two-channel system. High-Purity Class AB Design: Delivers 180W RMS per channel into 8Ω (280W into 4Ω) in Stereo Mode and up to 500W RMS into 8Ω in Bridged Mode. Heavy-Duty 800W Linear Power Supply Dual Differential Architecture & DC Blocker High damping factor (>400 @ 8Ω) guarantees fast, precise transient response and tight, deep bass response across complex speaker loads. Real-Time Dual Analog VU Meters: Equipped with professional-grade balanced XLR and single-ended RCA inputs with selectable gain levels (23dB / 29dB) for seamless preamp/DAC integration. Acoustically Shielded Aluminum Chassis: Precision CNC-machined aluminum casing Book a Demo: Experience the Eversolo AMP-F8 firsthand. This amplifier will be available for demonstration alongside the full Eversolo range at HiFiSound soon, Stockton.
180W/8ohm per channel, using a single pair of output MOSFET’s per channel in class A/B, offers stunning clean and detailed sound to the loudspeakers. A dual mono amplifier sporting two large power transformers and a host of innovative electronics to provide the very lowest distortion figures.
DMP-A10 Streamer/Pre-Amplifier & AMP-F10 Power Amplifier
The ultimate synergy of digital precision and raw acoustic power is realised in the combination of the Eversolo DMP-A10 Streamer/DAC/Preamp and the Eversolo AMP-F10 Power Amplifier. Together, these award-winning components form an unstoppable, world-class sonic and aesthetic stack. Whether anchoring a high-end home audio system or a premium home theatre setup, this pairing is engineered to redefine the boundaries of audio playback, delivering an incredibly immersive soundstage, absolute transparency, and the authority to drive even the most demanding loudspeakers with effortless realism. Key Features Eversolo DMP-A10: The Digital Mastermind Winner of the prestigious EISA 'Best Product 2025-2026' in the Premium Streamer category, the DMP-A10 combines a reference network player, a dual-mono DAC architecture, and a balanced analog pre-amplifier into a single masterclass component. Flagship Audio Architecture: Features reference-grade ESS ES9039PRO decoding (up to native DSD512 and 32-bit/768kHz) paired with dual temperature-controlled OCXO clocks to reduce jitter to an absolute minimum. Purist Pre-Amp & Isolation: Utilises a fully balanced R-2R analog volume circuit for complete signal integrity, alongside separate digital and analog power supplies for a black-silent noise floor. Advanced Connectivity & Tuning: Includes an SFP fibre optic network port for complete electrical isolation from router noise, dual independent subwoofer outputs with dedicated crossover/delay controls, and built-in Room Correction via a 10-band Parametric EQ. Intuitive Control & Storage: A joy to operate via its ultra-responsive 6.5-inch Full HD main touchscreen and an innovative volume knob with a built-in secondary status screen. It also boasts twin M.2 NVMe SSD slots supporting up to 8TB of internal storage. Eversolo AMP-F10: The High-Fidelity Powerhouse A well-deserved recipient of the Pursuit Perfect System 'Essential Audition Award,' the AMP-F10 is the definitive partner to the DMP-A10, expertly bridging the gap between explosive energy and delicate, high-fidelity precision. Massive & Flexible Power: Delivers a robust 320W per channel at 4 Ohms (200W at 8 Ohms) in stereo, and bridges to a monumental 950W at 4 Ohms (650W at 8 Ohms) for ultra-demanding setups. Isolated Linear Power Supply: Driven by a massive 1000W system with a symmetrical, dual-channel independent design that prevents cross-interference to maintain a balanced, expansive soundstage. Ultra-Low Distortion: Employs a high-current MOSFET array (5 pairs of matched transistors per channel in parallel) and advanced DC filtering to eliminate transformer hum and low-frequency mains interference. Authoritative Speaker Control: Boasts a damping factor over 600@8 Ohm 1KHz for tight, articulate, and punchy low-frequency control, complete with flexible balanced XLR and unbalanced RCA inputs. Experience the Eversolo Range Firsthand - Book a Demo at HiFi Sound, Stockton Ready to experience the breathtaking dynamics and transient detail of this flagship stack for yourself? The full Eversolo range is available for demonstration at our shop. Contact HiFi Sound in Stockton today to book your demo and explore this incredible performance firsthand.
Performer m1000 Monoblock Amplifier (Single)
With a power amplification of 750 W (4 Ω) [1000 W (2 Ω); 420 W (8 Ω)], this completely analog amplifier easily controls any loudspeaker. Thanks to the VOLTAiR technology the performance of the m1000 is detail-rich, vivid, honest and plain simply beautiful. Key Features: Class-AB amplifier circuit XLR balanced input Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 2 ohms impedance. 3 interchangeable decorative panels included to switch up the look of the m1000.
Performer s1200 Stereo Power Amplifier
This impressive stereo power amplifier leads even the most demanding speakers to soundscapes beyond your expectations. With a power amplification of 2 x 520 W (4 Ω) [2 x 550 W (2 Ω); 2 x 300 W (8 Ω)], this completely analog amplifier easily controls any loudspeaker. Thanks to the VOLTAiR technology the performance of the s1200 is detail-rich, vivid, honest and plain simply beautiful. Key Features: Class-AB amplifier circuit Stereo pair of XLR and RCA inputs selected via the Input Select switch on the rear panel. Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 2 ohms impedance 3 interchangeable decorative panels included to switch up the look of the s1200.
Performer s800 Stereo Power Amplifier
This small completely analog stereo power amplifier shows everyone that size does not necessarily have anything to do with greatness. With a power amplification of 2 x 285 W (4 Ω) [2 x 185 W (8 Ω)] or 1 x 450 W (8 Ω, Bridge Mode), this amplifier easily controls any loudspeaker. Thanks to VOLTAiR technology, it is fast, precise and highly efficient with outstanding sound. Key Features: Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Stereo pair of XLR inputs with input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 4 ohms impedance. Bridge Mode, means you are able to turn the two power amplifier channels into one power amplifier, allowing 450 W into 8 Ohm in mono operation mode.
Performer s900 Stereo Power Amplifier
The SPL Performer s900 stereo power amplifier sits in the middle of the Performer line, drawing its design and component choices from the larger SPL Performer s1200. It strikes the perfect balance between sonic excellence and performance, making it ideal for high-resolution speakers that aren’t overly power-hungry, regardless of their size. With an output of 2 x 370 W at 4 Ω (2 x 420 W at 2 Ω; 2 x 200 W at 8 Ω), the s900 has more than enough power to drive any loudspeaker with ease. Despite its compact size, the Performer s900 is a powerhouse. It offers impressive headroom thanks to SPL's VOLTAiR technology, delivering a sound that is rich in detail, vivid, honest, and musically engaging. Key Features: Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Stereo pair of XLR inputs with input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 4 ohms impedance. Bridge Mode, means you are able to turn the two power amplifier channels into one power amplifier, allowing 450 W into 8 Ohm in mono operation mode.
X-A1200 Mono Power Amplifier (Single)
For those who have a discerning ear and devote a significant amount of their leisure time to listening to music, the Advance Paris X-A1200 mono power amplifier from Advance Paris is the perfect flagship model that meets their high expectations. This amplifier has been designed to deliver exceptional audio quality and satisfy the needs of even the most demanding music enthusiasts. Key Features: Single Balanced XLR input and Unbalanced input on RCA Power output 8Ω :1 X 450 W RMS, 4Ω :1 X 700 W RMS High Bias switch allows the amplifier to use class A on the first watts, beyond this it automatically switches to class AB Dimmable VU meter
X-A160EVO Stereo Power Amplifier
The Advance Paris X-A160EVO is an ultra rigid partitioned chassis, ensuring efficient insulation. Components are carefully chosen and selected. The high power toroidal transformer (800 VA) is linked to a high current bipolar power transistors assembly, which gives X-A160EVO awesome performance. Key Features: Stereo pair of XLR inputs Power output 8 Ω : 2 X 160 W RMS or 4 Ω : 2 X 240 W RMS High Bias switch allows the amplifier to use class A on the first watts, beyond this it automatically switches to class AB
X-A220EVO Mono Power Amplifier (Pair) - Ex-Demo
Please Note: This is a one time listing for an ex-demonstration pair of X-A220EVO's at a discounted price, please note there maybe cosmetic imperfections. The X-A220EVO by Advance Paris is a powerful monophonic amplifier that can deliver an impressive 220W power at 8ohms. It can be perfectly paired with the X-P500 preamplifier to create a truly musical hi-fi system. The amplifier boasts technical excellence and an audiophile circuit design, resulting in exceptional performance. Key Features: Single Balanced XLR input and Unbalanced input on RCA Power output 8Ω :1 X 220 W RMS or 4Ω : 1 X 350 W RMS High Bias switch allows the amplifier to use class A on the first watts, beyond this it automatically switches to class AB Dimmable VU meter
X-A220EVO Mono Power Amplifier (Single)
The X-A220EVO by Advance Paris is a powerful monophonic amplifier that can deliver an impressive 220W power at 8ohms. It can be perfectly paired with the X-P500 preamplifier to create a truly musical hi-fi system. The amplifier boasts technical excellence and an audiophile circuit design, resulting in exceptional performance. Key Features: Single Balanced XLR input and Unbalanced input on RCA Power output 8Ω :1 X 220 W RMS or 4Ω : 1 X 350 W RMS High Bias switch allows the amplifier to use class A on the first watts, beyond this it automatically switches to class AB Dimmable VU meter