Compare
Please Note: This item cannot be ordered online. If you are interested, please click on the 'Enquire' button above.
Put a big speaker in a small room, too much bass. Put a small speaker in big room, too little bass. In general, it is true. There is no one-size-fits-all. Adding one or more of the Maggie Bass Panels accomplishes the same results as pulling out the bass section of your existing Maggie to a larger size.
DWMFor the first time in the history of LEAK, it is possible for the audio enthusiast to enjoy CD and digital media playback.
The LEAK CDT offers the highest available standard of sound reproduction from CD playback within this price class. It is also equipped with USB storage device playback functionality and utilizes an ultra-smooth slot-loading mechanism that exudes quality and reliability.
The CD transport is carefully mounted within its own electromagnetically shielded enclosure and is provided with a dedicated power supply. The digital clock is controlled by a temperature-compensated crystal oscillator that makes sure the digital output from both the coaxial and optical sockets has minimum digital distortion, thus the digital signal extraction is exceptionally precise.
6E-LCDTThe SPL Performer s900 stereo power amplifier sits in the middle of the Performer line, drawing its design and component choices from the larger SPL Performer s1200. It strikes the perfect balance between sonic excellence and performance, making it ideal for high-resolution speakers that aren’t overly power-hungry, regardless of their size.
With an output of 2 x 370 W at 4 Ω (2 x 420 W at 2 Ω; 2 x 200 W at 8 Ω), the s900 has more than enough power to drive any loudspeaker with ease.
Despite its compact size, the Performer s900 is a powerhouse. It offers impressive headroom thanks to SPL's VOLTAiR technology, delivering a sound that is rich in detail, vivid, honest, and musically engaging.
Key Features:
- Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel.
- Stereo pair of XLR inputs with input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB.
- Recommended for driving speakers over 4 ohms impedance.
- Bridge Mode, means you are able to turn the two power amplifier channels into one power amplifier, allowing 450 W into 8 Ohm in mono operation mode.
| Frequency response | 10 Hz – 80 kHz |
|---|---|
| Input impedance | 20 kΩ |
| Gain | 26 dB |
| Noise | A-weighted: -123 dB |
| Operation voltage | Internal Linear Power Supply with Shielded Toroidal Transformer Toroidal transformer: 8665 VA Operating voltage (Input stage): +/- 60 V Operating voltage (power stage): +/- 64 V Operating voltage for relays, LEDs, AMP CTL: + 12 V |
| Output Impedence | 20 Hz – 20 kHz: < 0.035 Ω |
| Damping factor | 1 kHz, 8 Ohm: > 280 |
| Power output | RMS, 2 Ω: 2 x 420 W RMS,4 Ω: 2 x 370 W RMS, 8 Ω: 2 x 200 W |
| Power consumption | Power consumption: max. 900 VA Idle power consumption: 20 W Stand-by power consumption: < 0.3 W |
| Analogue Inputs | 1 x XLR (balanced) 1 x RCA (unbalanced) |
| Input sensitivity | 8 dBu |
| Analogue Outputs | Binding posts with 4 mm ø cable hole (screwable) and banana plug |
| Mains Supply | Selectable 230 V AC / 50; 115 V AC / 60 Hz Fuse 230 V: T 4 A |
| Weight | 14.6kg |
| Dimensions | 278 x 114 x 345 mm (W x H x D) |