Compare
| Overview |
Van den Hul
The TAC Tone Arm Connector |
Michell
Finger Locking Nut |
Pro-Ject
High Power-IT 2 PSU |
| Summary | Van Den Hul The TAC - Tone Arm Connector The TAC, with optional 90º or 180º profiles and gold plated contacts, secure a very high quality connection for your tone arm.
| Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300. | The High Power-IT 2 is a three pin power supply with a ground connection for Pro-Ject turntables. It gets rid of ground related hum problems, especially occurring with amplifiers that have no real ground connection. Key Features:
If a turntable is not properly grounded, it may have a different ground reference to the connected amplifier. Consequently, these potential differences induce a compensating current which can be heard as a hum. Many modern amps, especially those used in sound bars and streaming speakers (but also found across a wide variety of hi-fi separates), have no ground connection and can therefore experience this problem. These systems are called, in technical terms, "floating mass systems". If a standard turntable is connected to such a "floating mass" amplifier, then and audible hum can be the result. Technical Specifications:
|
| Reference | F23BO | A020 | PHIGHPOWERIT2 |
| Specifications | |||
| Price |
£46.50
|
£25.00
|
£25.00
|
| Actions |
Van den Hul
The TAC Tone Arm Connector
Summary
Van Den Hul The TAC - Tone Arm Connector
The TAC, with optional 90º or 180º profiles and gold plated contacts, secure a very high quality connection for your tone arm.
- Five contacts with 24 carat gold plating over silver plating over copper plating. The contacts have a standard 270º / 5 pin DIN configuration.
- The contacts are based on an adjustable Teflon disc which is able to cover any angle related to the connector housing. This way the optimal position towards the tone arm is always assured.
- The 90º profile of the connector housing is designed to combine vertical mounting and horizontal cable exit. Additionally, both profiles offer enough room to have the cable wires pushed in after soldering.
- The TAC is a perfect match for our tone arm cables D-501 HYBRID, D-501 SILVER HYBRID and, because of its special shape, the flat twin cable D-502 HYBRID.
- Cable clamping is done by tightening the rear-nut of the 3 part construction of the connector housing. (If the TAC doesn’t fit in the tone arm socket… use sandpaper to slim the outer dimensions).
- The color is black and the cable entrance dimensions are. 10.0 x 4.0 mm (w x h).
£46.50
Michell
Finger Locking Nut
Summary
Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.
A020
£25.00
Pro-Ject
High Power-IT 2 PSU
Summary
The High Power-IT 2 is a three pin power supply with a ground connection for Pro-Ject turntables. It gets rid of ground related hum problems, especially occurring with amplifiers that have no real ground connection.
Key Features:
- 3 pin DC with ground connection
- Proper grounding for your turntable
- Dramatically reduces grounding hum
- Solution for floating mass systems
- Delivers cleaner current & power
- Compatible with 15V DC Pro-Ject turntables
If a turntable is not properly grounded, it may have a different ground reference to the connected amplifier. Consequently, these potential differences induce a compensating current which can be heard as a hum. Many modern amps, especially those used in sound bars and streaming speakers (but also found across a wide variety of hi-fi separates), have no ground connection and can therefore experience this problem. These systems are called, in technical terms, "floating mass systems". If a standard turntable is connected to such a "floating mass" amplifier, then and audible hum can be the result.
Technical Specifications:
- Output: 15V DC, 1.5A
- Input: 100-240V AC, 1.1A, 47-63Hz
- Diameter DC Plug: 2.1 mm
- Dimensions: 92 x 45 x 32 mm
- Weight: 140g (Without Power Cord)
£25.00