Compare
| Overview |
Chord Company
Epic Power Cable |
SPL
Director Mk2 DAC Preamplifier |
VPI
JMW-9 Alignment Jig | ||||||||||||||||||||||||||||||||
| Summary | Chord Company Epic Power is a high-specification mains cable for hi-fi and audiovisual systems. Hand-built in the UK, the design incorporates our unique ARAY conductor technology, originally created for our flagship products but now enhancing the performance of our other ranges. Key Features:
| The central unit of the HiFi system is the preamplifier. With remote source selection and volume control, tape monitor path, retro-look-VU-meters, premium DA-converter and the all superior VOLTAiR technology, the Director Mk2 caters for musical blockbusters. Key Features:
| The JMW alignment jig is a simple to use, accurate alignment jig for setting cartridge measurements It addresses the three most important factors of alignment: Proper Offset, Tracking, and Overhang. | ||||||||||||||||||||||||||||||||
| Reference | EPI1400 | 184 | AJ001 | ||||||||||||||||||||||||||||||||
| Specifications | Amplifier Specifications:
| ||||||||||||||||||||||||||||||||||
| Price | From
£720.00
|
£3,750.00
|
£90.00
| ||||||||||||||||||||||||||||||||
| Actions |
Chord Company
Epic Power Cable
Summary
Chord Company Epic Power is a high-specification mains cable for hi-fi and audiovisual systems. Hand-built in the UK, the design incorporates our unique ARAY conductor technology, originally created for our flagship products but now enhancing the performance of our other ranges.
Key Features:
- High purity multi-strand copper conductors with unique ARAY technology.
- PVC internal and external insulation with high mechanical damping factor.
- Dual layer high frequency effective braid and foil combination shield.
- High density vibration damping outer jacket.
- Available fitted with high-spec 10 or 16 amp IEC or Fig8 connectors and UK mains connector.
- Standard lengths: 1m, 1.5m, 2m and 3m.
SPL
Director Mk2 DAC Preamplifier
Summary
The central unit of the HiFi system is the preamplifier. With remote source selection and volume control, tape monitor path, retro-look-VU-meters, premium DA-converter and the all superior VOLTAiR technology, the Director Mk2 caters for musical blockbusters.
Key Features:
- Up to 10 stereo sources (6 analog and 4 digital) can be connected to the Director Mk2.
- Two stereo output pairs (1 x XLR, 1 x RCA) for connecting power amplifiers or active loudspeakers.
- Built in DAC768 with a resolution of 32 bits and a sampling rate of up to 768 kHz.
- Two mechanical VU meters visualize the input levels for the left and right audio channel.
- Volume control can be remotely controlled with any infrared remote control.
| Frequency response | 10 Hz – 100 kHz |
|---|---|
| Dynamic range | 132 dB |
| THD | 0 dBu, 1 kHz, analog: 0.0030 % 0 dBu, 1 kHz, digital: 0.0016 % |
| Input impedance | RCA: 47 kΩ XLR: 20 kΩ |
| Gain | 32.5 dBu Max |
| Noise | A-weighted: -99 dBu |
| Operation voltage | Internal Linear Power Supply with Shielded Toroidal Transformer Operating voltage for analog audio: +/- 60 V Operating voltage for relays and LEDs: + 12 V |
| Output Impedence | 75 Ω |
| Power consumption | max. 40 VA Stand-by power consumption: < 0.3 W |
| Analogue Inputs | 2 x XLR (balanced) 2 x RCA |
| Digital Inputs | Via DAC768 AES/EBU (XLR), PCM sample rates: 44.1/48/88.2/96/176.4/192 kHz Coaxial SPDIF (RCA), PCM sample rates: 44.1/48/88.2/96/176.4/192 kHz Optical SPDIF (Toslink F06), PCM sample rates: 44.1/48/88.2/96/with Glass fibre |
| Analogue Outputs | 2 x XLR (balanced) 1 x RCA |
| Crosstalk | -103 dBu |
| Mains Supply | Selectable 230 V AC / 50; 115 V AC / 60 Hz Fuse for 230 V: T 0.5 A |
| Weight | 4.55kg |
| Dimensions | W x H x D : 278 x 100 x 300 mm |
VPI
JMW-9 Alignment Jig
Summary
The JMW alignment jig is a simple to use, accurate alignment jig for setting cartridge measurements
It addresses the three most important factors of alignment: Proper Offset, Tracking, and Overhang.
AJ001