Lehmann Audio Black Cube SE MM/MC Phono Preamplifier

The Lehmannaudio Black Cube SE phono stage is compatible with practically all available cartridges  on the market from  High Output MM to MC. Apart from the standard switch settings there is one onboard slot that can be fitted with a custom impedance to supply perfect termination even for the most exotic cartridges. No more need for expensive impedance plugs!

The input stages used in the Black Cube SE can also be found in top notch mixing consoles or in well known professional  microphone preamps. The entirely passive RIAA equalization network is realized with high precision foil capacitors. All resistors are of the low noise metal film variety. The switches for gain and load settings have gold plated contacts.

Because of the small outer dimensions the Black Cube SE can be placed next to the turntable. This minimizes loss due to cable lengths.

Lehmannaudio always pays special attention to details: the cable between power supply and audio section is shielded and uses a Neutrik connector with gold plated contacts at the power supply side. The cases of both the power supply and the audio section are made of nonmagnetic material (aluminium) and are equipped with a top cover coated with a special anti-resonance treatment.

Technical Specifications:

• Sensitivity: (Output 775 mV/ 0 dB) MM: 3.8 mV/1 kHz / MC: 0.38 mV/1 kHz
• Gain at 1kHz: MM: 46 dB / MC: 66 dB
• Signal to Noise Ratio (RMS Unweighted): MM: 71 dB / MC: 63 dB
• Gain: 36 dB / 46 dB / 56 dB / 66 dB 
• Channel Separation: > 85 dB at 10 kHz 
• Input Capacitance: 100pF
• Input Impedances: 47 kΩ, 470Ω, 100Ω (Switchable) / 1x Custom Load
• Output Impedance: 47Ω
• RIAA Filter: Passive Equalization (Between To Linear Gain Stages)
• Bass Filter: 50 Hz, 6 dB/oct.
• Inter-Channel Mismatch: Typ. 0.5dB
• Power Consumption: < 3W
• Dimensions: Audio Section: 113 x 108 x 45mm 
• Power Supply: 93 x 233 x 45mm
• Weight: Black Cube SE: 400g / PSU: 1000g

We endeavour to despatch same day for orders placed up to 1pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK Orders

We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS.

International Orders:

Due to the nature of our products and brand restrictions we are only able to send certain items internationally. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

Collect in Store or Home Install

At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock.