Pro-Ject Box Design Phono Box DS3 B Moving Magnet Phono Preamplifier

The Pro-Ject design team took the decision to employ discrete circuitry in the Phono Box DS3 B. Discrete circuits involve no operational amplifiers (op-amps), and the result is a more neutral, natural, dynamic, and vivid sound. They are more complicated to put together and involve a greater variety of components, but the result when utilised in a well-organised electrical layout is a true high-end sound.

This philosophy for the best possible performance carries through to the variety of conveniently-placed features the Phono Box DS3 B has on offer. The phono stage can be connected to two turntables at the same time, and each input will save its previous settings in memory so the Impedance, Capacitance (for MM cartridges) and Gain will all be set as you switch between turntables. For MC cartridges, the continuously adjustable load-impedance dial on the front panel allows you to perfectly set the impedance to suit your cartridge and your ears.

As the Phono Box DS3 B is equipped with both balanced inputs and outputs, it is also part of Pro-Ject’s True Balanced Connections concept. By connecting to a turntable with a moving coil cartridge and using one of Pro-Ject’s balanced connection cables, your analogue system can benefit from increased dynamics, less noise and improved signal-to-noise ratios. Going true balanced is like hearing parts of your music that were not there before.

Technical Specifications:

• Input impedance: Stepless 10 – 1000 ohms or fix 47kOhms
• Input capacitance: 50, 150, 300, 400pF
• Gain (+ 6dB using XLR Out): 40, 45, 50, 55, 60, 65 dB
• SNR MM (40dB): 104dBV, 111dBV - ‚A‘ weighted
• SNR MC (60dB): 85dBV, 91dBV - ‚A‘ weighted  
• THD at 1 kHz: <0,001% MM, < 0,004% MC
• THD (20Hz-20kHz): <0,005% MM, < 0,01% MC
• RIAA-equalization curve accuracy: < 0,25dB / 20Hz - 20kHz
• Subsonic filter: 20Hz with 18dB/octave
• Input: 1x 5-pin mini XLR / 1x pair XLR / 1x pair RCA phono
• Line-level output: 1x pair RCA, 1x pair XLR
• Wiring XLR sockets: 1 ground, 2 “hot” and 3 “cold”
• Trigger In/Out: 12V on/off detector
• Outboard power supply: 18V/500mA DC
• Power consumption: 18V/max.290mA DC, <0.5 W standby
• Dimensions: 206 x 72 x 194 (205 with sockets) mm
• Weight: 480g without power supply

We endeavour to despatch same day for orders placed up to 1pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK Orders

We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS.

International Orders:

Due to the nature of our products and brand restrictions we are only able to send certain items internationally. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

Collect in Store or Home Install

At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock.