Ortofon Cadenza Black Moving Coil Cartridge

By carefully implementing cobalt-iron pole pieces,  using new improved winding processes on the armature, and employing an extruded aluminium housing - amongst other changes - the Cadenza Series is able to out-perform all those that came before it. Like other modern ranges, the Cadenza Series is structured in Ortofon's preferred colour-tier nomenclature; so there are Red, Blue, Bronze, Black and Mono (White) variants available to suit varying budgets and tastes.

As with all modern Ortofon ranges, the top cartridge in the Cadenza Series is the Black model. The Cadenza Black is a flagship-status cartridge that boasts a a pristine-cut Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod; this material is extremely stiff and even more lightweight than aluminium, making it a real premium component choice. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated version of the popular 6NX copper wire.

The Black model also uses Ortofon's Wide Range Damping (WRD) system, effectively controlling the high- and low-frequency damping separately. WRD was originally developed in 1979 for the MC 20 MK II, but since that time it has been more commonly reserved only for Ortofon's super-high-end cartridges, such as the MC Windfeld. It works by clamping a small, heavy disc of exotic metal between two rubber absorbers with different properties. The result is superlative tracking ability (90µm with the Cadenza Black) with perfect damping across the whole frequency range and no distortion or resonance. Thanks to WRD, the Cadenza Black spans a very wide frequency range compared to other models in the Cadenza Series.

Technical Specifications:

• Output Voltage (at 1kHz, 5cm/sec): 330μV
• Channel Balance at 1kHz: < 0.8dB
• Channel Separation at 1kHz: > 27dB
• Channel Separation at 15kHz: > 20dB
• Frequency Range (at -3dB): 20Hz - 60kHz
• Frequency Response 20Hz - 20kHz: +1.5 / 0
• Tracking Ability at 315Hz: Typically 90μm
• Compliance, Dynamic, Lateral: 16μm / mN
• Stylus Type: Nude Shibata
• Cantilever: Boron
• Stylus Tip Radius r / R: 6 / 50μm
• Tracking Force Range: 2.0 - 2.5g (20 - 25mN)
• Recommended Tracking Force: 2.3g (23mN)
• Tracking Angle: 20º
• Internal Impedance / DC Resistance: 5Ω
• Recommended Load Impedance: > 10Ω
• Cartridge Body Material: Stainless Steel Aluminium
• Cartridge Colour: Black / Black
• Cartridge Weight: 10.7g

We endeavour to despatch same day for orders placed up to 1pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK Orders

We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS.

International Orders:

Due to the nature of our products and brand restrictions we are only able to send certain items internationally. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

Collect in Store or Home Install

At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock.