ProAc K8 Floorstanding Speakers

code: n/a
From £21,933.33 (FREE UK Delivery)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

This item cannot be ordered online. If you are interested please click on the Ask a Question button below.

The ProAc K6 is one of ProAc's most successful designs and the plans to make a larger K8 have finally come to fruition.

This item cannot be ordered online. If you are interested please click on the Ask a Question button below.
The K8 uses a larger 8 inch bass driver than the K6, the cone is made from Kevlar weave material, then polished and concentrically weighted.
With a new wider cabinet, the midrange horn could now be redesigned. Stewart Tyler decided to make a very shallow midrange horn from billet aluminium. The midrange horn being very shallow gives excellent dispersion this widens the sound stage and reveals details right down to the finest brushed cymbal.
The ProAc ribbon tweeter is also used as it is in most of ProAc's high end speakers. The tweeters are wonderfully natural and fine detail is produced even at high levels with comfort.
The 8 inch Kevlar bass drivers are made in house these bass drivers are ported through a curved tude in the base of the loudspeaker.
Technical Specifications:
  • Nominal Impedance: 4 Ohms
  • Recommended Amplifiers: 10 to 500 watts
  • Frequency Response: 20Hz to 30KHz
  • Sensitivity: 91.5 dB linear for 1 watt at 1 metre
  • Bass Driver: 2 x 8 inch studio professional drive units with polymer impregnated and polished Kevlar weave cones, with rear lacquer and concentric weighting
  • Midrange Driver: 3 inch studio professional soft dome loaded with our new billet aluminium wide dispersion horn.
  • Tweeter: ProAc ribbon with diaphragm as 'light as a human hair' alnico magnet and rear chamber damping
  • Crossover: Finest components on dedicated circuit board. ProAc multistrand oxygen-free copper cable throughout split for optional bi wiring and bi amping
  • Dimensions: Height: 49.2in (1230mm) including plinth and spike. Width: 9.6in (240mm) Depth: 18in (450mm)
  • Weight: 154.5lb (70Kg) each unpacked
  • Mode: Floor standing
  • Grille: Acoustically transparent crimplene
  • Finish: Standard Finishes - Black Ash, Mahogany, Cherry, Maple / Premium Finishes - Ebony, Rosewood

We endeavour to despatch same day for orders placed up to 2pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is recieved. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

COLLECT IN STORE OR HOME INSTALL:At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock. 

Be the first to review ProAc K8 Floorstanding Speakers. Write a review ›