Van den Hul The D-502 Hybrid TAC180-RCA Interconnect

The D–502 Hybrid's sound quality is extremely detailed without any metallic character. The D–502 Hybrid is equipped with a centre steel wire to provide extra mechanical reinforcement and strain relief. This coated steel wire, can be soldered and used as an extra ground-lead. The total pulling force handling of just this centre wire is already more than 30 kg. TAC180-RCA Version

Van den Hul The D-502 Hybrid TAC90-RCA Interconnect

The D–502 Hybrid's sound quality is extremely detailed without any metallic character. The D–502 Hybrid is equipped with a centre steel wire to provide extra mechanical reinforcement and strain relief. This coated steel wire, can be soldered and used as an extra ground-lead. The total pulling force handling of just this centre wire is already more than 30 kg. TAC90-RCA Version

Van den Hul The D-501 Silver Hybrid TAC180-RCA Interconnect

Same construction as the D -501 Hybrid, however, the two inner multistrand conductors are made of the highest grade Matched Crystal Silver. With durable black HULLIFLEX outer jacket. The D–501 Silver Hybrid is a cable with a very high shielding factor. Sonically this is one of the best cables in the Van den Hul program. The 2 signal lines are made each of 19 x 0.1 mm. very high grade OFC wires with the highest density of very pure silver coating. This cable is fitted with TAC 180° - RCA connections. Technical Specifications As an extra layer around the metal group, we use a Linear Structured Carbon ® (LSC) saturated coating. The signal line insulation with the colours white and yellow is made of cell-PE, so the stripping can even be done with your fingernails to prevent wire damage on the silver coated copper strands commonly caused by mechanical stripping. The resistance per signal lead is: 11.3 Ohm/100 meter. The capacitance between the 2 signal leads is: 75 pF/meter. Very flexible specially treated artificial fibres are used as a filler to prevent any harm caused by external humidity or chemicals. The shielding consists of 96 x 0.10 mm. wires of a high grade Matched Crystal (MC) OFC with a dense and very pure silver coating and a LSC saturated helical tape. The resistance of the shielding is: 2.3 Ohm/100 meter. The very flexible black outer jacket is made of migration-free HULLIFLEX ® to prevent any chemical deterioration over a long period. The type printing repeats every 25 cm. (10″) to make cutting of specified lengths easy.

Van den Hul The D501 Silver Hybrid TAC90-XLR Interconnect

A special edition of the D501 Hybrid, The D501 Silver Hybrid stranded signal lines are made of highest grade Matched Crystal Silver. This mat black Hulliflex® jacketed balanced cable was designed to support the tone-arm and mixing console industry: very flexible and with extremely good electrical qualities with a very high shielding factor.  Sonically this is one of the best cables in the Van den Hul program. This cable is fitted with TAC90 - XLR connections.

Van den Hul The D-501 Hybrid TAC180-RCA Interconnect

The D–501 Hybrid is a cable with a very high shielding factor. Sonically this is one of the best cables in the Van den Hul program. The 2 signal lines are made each of 19 x 0.1 mm. very high grade OFC wires with the highest density of very pure silver coating. This cable is fitted with TAC 180° - RCA connections.

Van den Hul The TAC Tone Arm Connector

Van Den Hul The TAC - Tone Arm Connector The TAC, with optional 90º or 180º profiles and gold plated contacts, secure a very high quality connection for your tone arm.  Five contacts with 24 carat gold plating over silver plating over copper plating. The contacts have a standard 270º / 5 pin DIN configuration.  The contacts are based on an adjustable Teflon disc which is able to cover any angle related to the connector housing. This way the optimal position towards the tone arm is always assured.  The 90º profile of the connector housing is designed to combine vertical mounting and horizontal cable exit. Additionally, both profiles offer enough room to have the cable wires pushed in after soldering.  The TAC is a perfect match for our tone arm cables D-501 HYBRID, D-501 SILVER HYBRID and, because of its special shape, the flat twin cable D-502 HYBRID.  Cable clamping is done by tightening the rear-nut of the 3 part construction of the connector housing. (If the TAC doesn’t fit in the tone arm socket… use sandpaper to slim the outer dimensions).  The color is black and the cable entrance dimensions are. 10.0 x 4.0 mm (w x h).