Aesthetix Atlas Eclipse Stereo Power Amplifier

First phase: The Atlas Eclipse Stereo features the Stealthcap™ capacitor, made with exotic new conductors, dielectric material, and composite resins to dramatically reduce reflections, enhancing focus and articulation with blacker backgrounds. Optional Chassis Upgrade: £1875.00 Key Features: Zero feedback, fully differential amplifier with complementary balanced bridge design for open sound. Tube gain stage using one 6SN7 tube per channel provides harmonic accuracy and soundstage layering. This single gain stage provides all of the voltage gain for the entire amplifier. Stereo amplifier: 200 watts per channel into 8 ohms; 400 watts per channel into 4 ohms Mono amplifier: 300 watts per channel into 8 ohms; 600 watts per channel into 4 ohms. Amplifier has a built-in high-pass crossover: 6 dB / octave, 16 settings from 40 Hz to 200 Hz in approximate 10 Hz increments. Single-ended and balanced inputs provide extended compatibility. Direct input bypasses all crossovers and switching for ultimate purity. Bus technology reduces power supply impedance between output devices for more instantaneous current. Power supply uses two transformers and three chokes. The high current section uses a dedicated transformer and choke input power supply. The vacuum tube B+ power supply has choke input and is discretely regulated. The result is unequalled clarity and control. Cardas patented rhodium-plated binding post with single knob lockdown. All aluminum chassis construction assures durability. Stainless steel cover for transformers prevents magnetic fields from interacting with sensitive audio circuitry, preserving low level musical nuances. RS232 control and trigger for special installation requirements. Available in black or silver faceplate.

Aesthetix Atlas Signature Stereo Power Amplifier

Atlas Stereo Signature uses the same circuits as the standard Atlas Stereo, but those circuits are implemented with only the highest quality parts available. Key Features: Zero feedback, fully differential amplifier with complementary balanced bridge design for open sound. Tube gain stage using one 6SN7 tube per channel provides harmonic accuracy and soundstage layering. This single gain stage provides all of the voltage gain for the entire amplifier. Stereo amplifier: 200 watts per channel into 8 ohms; 400 watts per channel into 4 ohms Mono amplifier: 300 watts per channel into 8 ohms; 600 watts per channel into 4 ohms. Amplifier has a built-in high-pass crossover: 6 dB / octave, 16 settings from 40 Hz to 200 Hz in approximate 10 Hz increments. Single-ended and balanced inputs provide extended compatibility. Direct input bypasses all crossovers and switching for ultimate purity. Bus technology reduces power supply impedance between output devices for more instantaneous current. Power supply uses two transformers and three chokes. The high current section uses a dedicated transformer and choke input power supply. The vacuum tube B+ power supply has choke input and is discretely regulated. The result is unequalled clarity and control. Cardas patented rhodium-plated binding post with single knob lockdown. All aluminum chassis construction assures durability. Stainless steel cover for transformers prevents magnetic fields from interacting with sensitive audio circuitry, preserving low level musical nuances. RS232 control and trigger for special installation requirements. Available in black or silver faceplate.

Aesthetix Rhea Signature MM/MC Phono Preamplifier

The Aesthetix Rhea Signature version uses custom-made inter-stage Teflon hybrid coupling capacitors, replacing the polypropylene units, between the 2nd and 3rd, and 3rd and 4th, gain stages (4 total per channel). Key Features: Three RCA inputs. Each input has its own gain and loading setting that is saved even when in standby mode or the unit is turned off. Zero feedback. 40-75dB gain maximum, selectable via front panel or remote control. 9 MC loading settings: 75-47,000 ohms, selectable via front panel or remote control. Remote control of gain, loading, input switching, mute, and demagnetizer. Built-in MC cartridge demagnetizer. Two sets of XLR and two sets of RCA outputs per channel. All tube amplification and output (10 tubes total). Full function remote included. Available in black or silver faceplate.

Aesthetix Calypso Eclipse Linestage

First phase: Internal changes to the Calypso start with .22uF / 600v Stealth coupling capacitors used between the gain stage and output stage. Four total of these exotic capacitors are used. Key Features: Fully balanced differential circuitry with ability to internally balance a single ended input signal. Zero feedback. Discrete switched resistor volume control with 88 1dB steps. All tube amplification and output (4 tubes total). Two sets of XLR and two sets of RCA outputs per channel. Bypass mode for home theatre processor throughput. Absolute phase, selectable via front panel or remote control. Full function remote included. Available in black or silver faceplate.

Aesthetix Calypso Signature Linestage

The Signature version uses custom-made inter-stage Teflon hybrid coupling capacitors, replacing the polypropylene units, between the gain stage and output stage (2 per channel). The change in these capacitors results in higher resolution, extension, less grain and more air. Key Features: Fully balanced differential circuitry with ability to internally balance a single ended input signal. Zero feedback. Discrete switched resistor volume control with 88 1dB steps. All tube amplification and output (4 tubes total). Two sets of XLR and two sets of RCA outputs per channel. Bypass mode for home theatre processor throughput. Absolute phase, selectable via front panel or remote control. Full function remote included. Available in black or silver faceplate.

Aesthetix Calypso Linestage

Calypso is an all-tube linestage suitable for audio and home cinema systems. Fully balanced circuitry from input to output, including internal balancing of single-ended inputs, results in common mode signal rejection and cleaner sound. The innovative discrete switched resister volume control maximizes resolution at any listening level. Every input is both single-ended and balanced for greater versatility. Home theatre bypass mode, absolute phase setting and full function remote are added conveniences. The all-aluminum chassis is rigid, acoustically inert and simply beautiful. Key Features: Fully balanced differential circuitry with ability to internally balance a single ended input signal. Zero feedback. Discrete switched resistor volume control with 88 1dB steps. All tube amplification and output (4 tubes total). Two sets of XLR and two sets of RCA outputs per channel. Bypass mode for home theatre processor throughput. Absolute phase, selectable via front panel or remote control. Full function remote included. Available in black or silver faceplate.

Aesthetix Janus Eclipse Preamplifier

First phase: Internal changes to the Janus start with .22uF / 600v Stealth coupling capacitors used between the second and third gain stages, and the third gain stage and output stage of the phono section. Two more are used between the gain stage and output stage of the line section, per channel. Twelve total of these exotic capacitors are used. Key Features: Fully balanced differential line-level circuitry with ability to internally balance a single ended input signal. RCA and XLR provided for each input. Discrete resistor volume control with 88 1dB steps. Zero feedback. Phono input: 40-75dB gain maximum, selectable via front panel or remote control. Built-in MC cartridge demagnetizer. 9 MC loading settings: 75-47,000 ohms, selectable via front panel or remote control. All tube amplification and output (12 tubes total). Two sets of XLR and two sets of RCA outputs per channel. Bypass mode for home theatre processor throughput. Absolute phase, selectable via front panel or remote control. Full function remote included. Available in black or silver faceplate.

Aesthetix Janus Signature Preamplifier

The Signature version uses custom-made inter-stage Teflon hybrid coupling capacitors, replacing the polypropylene units, between the gain stage and output stage (2 per channel). The change in these capacitors results in higher resolution, extension, less grain and more air. The 2uF output coupling capacitors (4 per channel) are replaced with 4uF Dynamicaps. This change provides more drive, bass extension, resolution and dynamics while also reducing grain. Key Features: Fully balanced differential line-level circuitry with ability to internally balance a single ended input signal. RCA and XLR provided for each input. Discrete resistor volume control with 88 1dB steps. Zero feedback. Phono input: 40-75dB gain maximum, selectable via front panel or remote control. Built-in MC cartridge demagnetizer. 9 MC loading settings: 75-47,000 ohms, selectable via front panel or remote control. All tube amplification and output (12 tubes total). Two sets of XLR and two sets of RCA outputs per channel. Bypass mode for home theatre processor throughput. Absolute phase, selectable via front panel or remote control. Full function remote included. Available in black or silver faceplate.

Aesthetix Janus Preamplifier

Janus is a full-function all-tube preamplifier with six line level inputs and one phono input. Janus represents the key features of Rhea phono stage and Calypso linestage combined into a single chassis. All tube amplification and output, a fully balanced linestage, discrete switched resistor volume control, versatile single-ended and balanced inputs and outputs, and dual-mono audio boards are all part of Janus. The full function remote controls all preamp and phono functions, including gain, loading, absolute phase and the internal demagnetizer. True to its Saturn Series heritage, the build and sound quality of Janus have won it global praise, including 2010 and 2011 TAS Editor's Choice Awards. Key Features: Fully balanced differential line-level circuitry with ability to internally balance a single ended input signal. RCA and XLR provided for each input. Discrete resistor volume control with 88 1dB steps. Zero feedback. Phono input: 40-75dB gain maximum, selectable via front panel or remote control. Built-in MC cartridge demagnetizer. 9 MC loading settings: 75-47,000 ohms, selectable via front panel or remote control. All tube amplification and output (12 tubes total). Two sets of XLR and two sets of RCA outputs per channel. Bypass mode for home theatre processor throughput. Absolute phase, selectable via front panel or remote control. Full function remote included. Available in black or silver faceplate.

Aesthetix Metis Linestage

Aesthetix is proud to introduce the Metis linestage featuring their innovative new Aesthetix Coupling Modules, an "Invisible" Separate Power Supply, and a stunning new chassis design.

Aesthetix Mimas Integrated Amplifier

Mimas is an integrated hybrid amplifier intended for high performance audio and home cinema systems. Designed to bridge the gap between ultra high performance separates, such as Aesthetix's Atlas amplifier and Calypso linestage, and mass market receivers. Sound quality, ease of use, flexibility and reliability are hallmarks of the design. Optional Extras: Phono Card - £1560.00 DAC Card - £1560.00 High Pass Crossover - £370.00 HRC-3 Remote Control - £505.00 Please contact us to configure your custom system.

Aesthetix Atlas Stereo Power Amplifier

ATLAS amplifiers are capable of driving virtually any high quality speaker. An innovative hybrid design incorporates a bipolar output stage, bipolar driver stage, and vacuum tube input gain stage. They stand alone as the only hybrid amplifiers with zero feedback, essential for maintaining harmonic integrity, air, space and coherence. The Atlas provides your choice of full range or high-pass inputs. This unique built-in filter is ideal for speakers featuring powered woofers, such as Vandersteen, or for audio and home cinema systems using outboard powered sub-woofers. Saturn Series design themes are evidenced in the specialized all-aluminum chassis construction and elaborate power supply design. Key Features: Zero feedback, fully differential amplifier with complementary balanced bridge design for open sound. Tube gain stage using one 6SN7 tube per channel provides harmonic accuracy and soundstage layering. This single gain stage provides all of the voltage gain for the entire amplifier. Stereo amplifier: 200 watts per channel into 8 ohms; 400 watts per channel into 4 ohms Mono amplifier: 300 watts per channel into 8 ohms; 600 watts per channel into 4 ohms. Amplifier has a built-in high-pass crossover: 6 dB / octave, 16 settings from 40 Hz to 200 Hz in approximate 10 Hz increments. Single-ended and balanced inputs provide extended compatibility. Direct input bypasses all crossovers and switching for ultimate purity. Bus technology reduces power supply impedance between output devices for more instantaneous current. Power supply uses two transformers and three chokes. The high current section uses a dedicated transformer and choke input power supply. The vacuum tube B+ power supply has choke input and is discretely regulated. The result is unequalled clarity and control. Cardas patented rhodium-plated binding post with single knob lockdown. All aluminum chassis construction assures durability. Stainless steel cover for transformers prevents magnetic fields from interacting with sensitive audio circuitry, preserving low level musical nuances. RS232 control and trigger for special installation requirements. Available in black or silver faceplate.

Aesthetix Rhea Moving Coil Phono Preamplifier

Rhea is an all-tube phono stage, suitable for moving coil and moving magnet cartridges. It `sitebuilder_3558_overlay`.`offers` high maximum gain at 75 dB, making it ideal for low output cartridges. Rhea broke new ground as the first phono stage with 3 phono inputs, the first with gain and loading settings stored in memory for every input, and the first with full remote control adjustability. Dual-mono audio boards provide superb channel separation and soundstaging. A cartridge demagnetizer is a built-in convenience that can also be operated by remote control. The all-aluminum chassis is designed for rigidity and acoustic inertness, the brushed anodized panels are beautiful too. Rhea has enjoyed worldwide acclaim for its sound quality, build quality, flexibility and ease of use. Key Features: Three RCA inputs. Each input has its own gain and loading setting that is saved even when in standby mode or the unit is turned off. Zero feedback. 40-75dB gain maximum, selectable via front panel or remote control. 9 MC loading settings: 75-47,000 ohms, selectable via front panel or remote control. Remote control of gain, loading, input switching, mute, and demagnetizer. Built-in MC cartridge demagnetizer. Two sets of XLR and two sets of RCA outputs per channel. All tube amplification and output (10 tubes total). Full function remote included. Available in black or silver faceplate.