Chord Company Epic High-Level Subwoofer Cable

Hand-built and rigorously tested at Chord Company HQ,  Epic High-Level subwoofer cables deliver exceptional performance. They feature three individually shielded runs of heavy-gauge, silver-plated copper wire (14 AWG for Shawline, 12 AWG for Epic), ensuring optimal signal transfer and protection from interference. Both lines utilise a PTFE dielectric and woven braided shielding, providing controlled, tight bass and remarkable clarity across your entire musical performance. For a secure and high-conductivity connection, we use ChordOhmic Choralloy® plated spades and Neutrik Speakon connectors. This seamless integration with your subwoofer elevates your system's sound with stunningly precise low frequencies. *Note Wiring may differ depending upon your equipment (e.g. Class D or Mono Amps) - check with manufacturer before installing.

Chord Company EpicXL Speaker Cable

EpicXL combines elements of Chord's Epic and Signature Reference/XL speaker cables.  A specially chosen soft PVC internal jacket is added to correctly space the shielding and minimise mechanical noise.  A high density braid and foil shield is applied to each set of conductors and this is in turn protected by a translucent outer jacket, again chosen to reduce unwanted mechanical noise.  The conductors are twisted together and clamped in place before being terminated with either banana or spade connectors.  By separately shielding the positive and negative conductors of each speaker cable run, we can produce a version of Epic that sounds markedly more refined and musically coherent. It’s particularly good at carrying micro-dynamics and detail and brings great separation and definition to instruments and voices. EpicXL takes a crucial step forwards in performance by using separate shields for each conductor.  That means neutrality, less noise, a bigger and more immersive soundstage and most of all, it means getting new joy from your existing music collection. Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents us from using this in our Epic range, we were able to find a version of XLPE (Cross-linked Polyethylene) that following extensive listening tests, proved clearly better than PTFE. Every set of EpicXL speaker cable is built to order and terminated at Chord's UK factory with ChordOhmic 4mm banana plugs or ChordOhmic spade connectors.

Chord Company EpicX ARAY RCA-5DIN Interconnect

EpicX ARAY DIN uses high-bandwidth conductors normally found in our higher cable ranges. It also uses multi-tiered shielding systems for all conductor pairs reducing interaction between the different signals that DIN cables need to carry. This low noise high bandwidth shielding ensures that the listener obtains the maximum performance from Naim Audio products. The design, shielding and ARAY geometry delivers the rhythm, groove and soul of the music – something that Naim users have always enjoyed from their equipment. EpicX ARAY DIN should also be auditioned with older DIN-equipped products such as Quad. The results can be quite staggering.

Chord Company EpicX ARAY XLR-XLR Interconnect

The EpicX ARAY XLR design was adapted to use an extra conductor for optimum performance and like its RCA counterpart, is capable of carrying a very high level of detail with musical coherence.

Chord Company Epic 5DIN-5DIN Interconnect

This is the first time that Chord have produced DIN cables in the Epic range. To improve musically on the Shawline DIN but without the Signature price tag wasn’t easy. Chord Company Epic DIN construction is a complete departure from the other analogue cables in the Epic range.

Chord Company Epic Streaming Interconnect

Ethernet cables don’t normally use high quality silver-plated conductors, high speed insulation and high density shielding.  Neither do they use our unique Tuned ARAY conductor geometry.  Chord Epic streaming cable has been designed to get the best and most coherent sound from any decent audio streamer.

Chord Company Epic USB Interconnect

Epic USB bridges the performance gap that existed between the Shawline and Signature USB cables and features the unique Tuned ARAY conductor concept. It is built in a very similar manner to the Signature Super ARAY USB and while the conductors are slightly different, in just about every other respect the same design philosophy is applied. Epic USB contains four conductors, (two of which are individually shielded), improved effective gauge silver-plated copper conductors and uprated FEP insulation. The earth shielding connection is further protected from high frequency noise with a two layer braided screen.

Chord Company Epic RCA-RCA Subwoofer Interconnect

Dedicated subwoofer cable. Designed to complement the Epic range and enhance any music/TV/movie/game surround system.

Chord Company Epic Figure 8 Power Cable

Chord Company Epic Power is a high-specification mains cable for hi-fi and audiovisual systems. Hand-built in the UK, the design incorporates our unique ARAY conductor technology, originally created for our flagship products but now enhancing the performance of our other ranges. Key Features: High purity multi-strand copper conductors with unique ARAY technology. PVC internal and external insulation with high mechanical damping factor. Dual layer high frequency effective braid and foil combination shield. High density vibration damping outer jacket. Available fitted with high-spec Fig8 connectors and UK mains connector. Standard lengths: 1m, 1.5m, 2m and 3m.

Chord Company Epic Power Cable

Chord Company Epic Power is a high-specification mains cable for hi-fi and audiovisual systems. Hand-built in the UK, the design incorporates our unique ARAY conductor technology, originally created for our flagship products but now enhancing the performance of our other ranges. Key Features: High purity multi-strand copper conductors with unique ARAY technology. PVC internal and external insulation with high mechanical damping factor. Dual layer high frequency effective braid and foil combination shield. High density vibration damping outer jacket. Available fitted with high-spec 10 or 16 amp IEC or Fig8 connectors and UK mains connector. Standard lengths: 1m, 1.5m, 2m and 3m.

Chord Company EpicX Speaker Cable

EpicX (prev Epic/Epic Twin) has been part of Chord's speaker cable range for many years – it’s a shielded cable that works with pretty much every style of speaker. From mid-price to high end, EpicX brings detail, dynamics, resolution and coherence to every speaker it's used with. It’s particularly good at bringing control and definition across the bass frequencies and is the ideal cable solution for floor-standing speakers.