Naim New Classic Preamp XLR to NAP300 XLR 1.0m Pair

The 00-010-0248 is a specific 1.0m cable which forms the perfect connection between Naim Audio New Classic Preamps (NSC 222  / NAC 332) via XLR to a NAP300.

Naim Super Lumina Interconnect

During the development of Statement, Naim Audio's flagship amplification system, their engineers realised that they would need to design a whole new range of high-performance cables for it to reach its true potential. With this in mind they began a development project to design interconnects and speaker cable that would meet Statement standards of performance. Through a deep understanding of material science and after thousands of hours testing in the listening room, the Super Lumina range was born. Designed to maximise the performance of Statement but equally at home in 500 Series and Classic Series systems, Super Lumina pre to power amp interconnects are available with DIN to XLR, and XLR to XLR terminations. Super Lumina source to preamplifier interconnects are available with DIN to DIN, DIN to RCA and RCA to RCA.

Chord Company ClearwayX ARAY Analogue 5DIN to 5DIN Cable - 1.0m

The ClearwayX ARAY DIN cable features ARAY conductor geometry, heavy gauge OFC conductors, upgraded XLPE insulation and dual-layer shielding. Fitted with Chord Company ChorAlloy™ plated connectors/pins. Equipment fitted with DIN sockets tends to be either Naim Audio or older Quad models. Chord have huge experience in building both and ClearwayX DIN cables, this cable is fitted with 5 pin DIN plugs in push-fit metal. Strongly recommended for all Naim Audio owners and with any age or combination of equipment – classic and modern units alike will feel the benefit.

Chord Company ClearwayX ARAY Analogue 4DIN to 4DIN Cable - 1.0m

The ClearwayX ARAY DIN cable features ARAY conductor geometry, heavy gauge OFC conductors, upgraded XLPE insulation and dual-layer shielding. Fitted with Chord Company ChorAlloy™ plated connectors/pins. Equipment fitted with DIN sockets tends to be either Naim Audio or older Quad models. Chord have huge experience in building both and ClearwayX DIN cables, this cable is fitted with 4 pin DIN plugs in push-fit metal. Strongly recommended for all Naim Audio owners and with any age or combination of equipment – classic and modern units alike will feel the benefit.  

Chord Company ClearwayX ARAY Analogue 4DIN to 5DIN Cable - 1.0m

The ClearwayX ARAY DIN cable features ARAY conductor geometry, heavy gauge OFC conductors, upgraded XLPE insulation and dual-layer shielding. Fitted with Chord Company ChorAlloy™ plated connectors/pins. Equipment fitted with DIN sockets tends to be either Naim Audio or older Quad models. Chord have huge experience in building both and ClearwayX DIN cables, this cable is fitted with 4 pin to 5 pin DIN plugs in push-fit metal. Strongly recommended for all Naim Audio owners and with any age or combination of equipment – classic and modern units alike will feel the benefit.

Chord Company EpicX ARAY RCA-5DIN Interconnect

EpicX ARAY DIN uses high-bandwidth conductors normally found in our higher cable ranges. It also uses multi-tiered shielding systems for all conductor pairs reducing interaction between the different signals that DIN cables need to carry. This low noise high bandwidth shielding ensures that the listener obtains the maximum performance from Naim Audio products. The design, shielding and ARAY geometry delivers the rhythm, groove and soul of the music – something that Naim users have always enjoyed from their equipment. EpicX ARAY DIN should also be auditioned with older DIN-equipped products such as Quad. The results can be quite staggering.

Chord Company ShawlineX ARAY RCA-5DIN Interconnect

There are many upgrade paths for Naim Audio owners but The Shawline DIN cables have to be for any music lover, one of the most cost effective and musically profound steps forward you can make.

Chord Company Epic 5DIN-5DIN Interconnect

This is the first time that Chord have produced DIN cables in the Epic range. To improve musically on the Shawline DIN but without the Signature price tag wasn’t easy. Chord Company Epic DIN construction is a complete departure from the other analogue cables in the Epic range.

REL Acoustics Bassline Blue Naim Compatible Hi Level Subwoofer Cable

The special and unique characteristics of REL's filter board are known only to their engineers and within this circuit lies the key to designing cables optimized for REL Sub Bass Systems. Available in 3M, 6M, and 10M lengths. Naim amplifier compatible Bassline Blue cables available in 3M and 6M lengths.

Naim Power-Line Lite Mains Cable

Every link in the audio chain is important, and Naim are always looking at ways to improve each one. Power-Line Lite has been developed alongside the new Uniti range by their specialist engineers to do just that. It uses the expertise from our original Power-Line mains cable to create a superior plug, paired with the mains cable Naim have trusted in their listening tests for over 15 years.

Naim Super Lumina Speaker Cable

During the development of Statement, Naim Audio's flagship amplification system, their engineers realised that they would need to design a whole new range of high-performance cables for it to reach its true potential. With this in mind they began a development project to design interconnects and speaker cable that would meet Statement standards of performance. Through a deep understanding of material science and after thousands of hours testing in the listening room, the Super Lumina range was born. Designed to maximise the performance of Statement but equally at home in 500 Series and Classic Series systems, Super Lumina speaker cables are available with 4mm or spade connectors.

Naim Power-Line Mains Cable

To Naim Audio, a smooth, stable, low-noise supply is critical. It's absolutely fundamental to performance. That's why they designed the Power-Line mains cable. Its complex, precision-engineered construction has been defined and refined following solid mechanical engineering principles and then confirmed after hundreds of hours of testing in the listening room.

Naim NAC A5 Loudspeaker Cable

Every link in the hi-fi chain is important. Connections between components, including those to the loudspeakers, are crucial to the performance of any audio system. Key Features: Twin separated 4mm2 conductors Design and build optimised for Naim Audio amplifiers Available in black and white

Naim SNAIC DIN Interconnect

The SNAIC family of interconnects use a cable which is custom manufactured to Naim Audio's specification to provide the ideal impedance, capacitance and conductivity for their products. Each SNAIC interconnect is meticulously hand-built in-house using established production techniques.

Naim DC1 Digital Coaxial Interconnect

The DC1 is a versatile digital coaxial cable which forms the perfect connection between Naim Audio DACs – or streaming products with a digital input – and any digital source. Developed alongside their reference DAC, it supports high-resolution UPnP streaming and is a perfect match for their range of digital products.

Naim Burndy Interconnect

Burndy cables carry both signal and power, and feature dedicated, multi-pin, locking connectors. They are used with several of Naim Audio's power supplies and care should be taken to ensure that the correct cable is used in each application - the configuration of the cables varies with the particular units that are being linked. The SXPS Burndy variant is used for the CDX, NDS, NDX, ND5 XS, DAC and HDX source products. There is also a Burndy variant for use with the SUPERLINE phonostage and the SNAXO and SNAXO BMR crossovers.

Naim Hi-Line Interconnect

During the development of the reference CD555 CD player, a special project ran in parallel; to develop a new signal cable that would exceed the performance of Naim Audio's standard signal cable. The brief was to investigate all parameters of a signal carrier; to improve the whole rather than just improving the cable as is the more normal development practice. The result of this pure development project is the Hi-Line signal cable. Available with both DIN and RCA terminations, its patented Air-PLUG connector is a decoupling device that reduces vibration transmitted along the cable itself, preserving your system's precious musicality.