Scansonic MB-8B Floorstanding Speakers

The MB8B is an impressive loudspeaker featuring two 8” woofers, delivering powerful sound that excels at high SPL or full-range reproduction. Whether you're looking to achieve dynamic sound in a large space or enhance your home cinema experience, the MB8B is an ideal choice. The addition of a ribbon tweeter ensures crystal-clear high frequencies, offering a smooth and refined sound profile. This 3-way loudspeaker, equipped with a carbon fibre midrange and woofer, provides a dynamic, organic, and authentic audio performance. Key Features: Concept: 3-Way Frequency response (-6dB): 34Hz-20 kHz Impedance: 4 Ohm Sensitivity: 88 dB Crossover: 400 Hz-2800 Hz Enclosure: Bass reflex–3 ports Drive units: 1 x Ribbon Tweeter / 2x 5,25″ Midrange / 2 x 8″ Woofer Recommended amplification: Min 100 watts  

Scansonic Twin Pillar Speaker Stand

Scansonic's twin pillar speaker stand designed for the MB1.Please Note: Speakers pictured are not included.

Scansonic Single Pillar Speaker Stand

Scansonic's single pillar speaker stand designed for the M10 and MB1., available in piano black or piano white finishes.Please Note: Speakers pictured are not included.

Scansonic MB-Centre B Centre Channel Speaker

The MB-Center B is a high performance center channel for a MB home theatre setup. The MB-Center B is like the other MB series speakers built around the amazing MB sealed ribbon planer tweeter. This allows for a stress-free, dynamic and detailed treble presentation.

Scansonic MB-6B Floorstanding Speakers

The MB-6B is Scansonic's flagship speaker. Tall, slim and elegantly curved it follows the core of traditions in Danish loudspeaker design. The design is centered around the ultra light moving mass sealed ribbon tweeter, that has unique speed, resolution and dynamic transient capability. This makes for a very transparent and highly detailed reproduction of the finest details in the program material.

Scansonic MB-5B Floorstanding Speakers

The MB-5B is a unique slim floor stander with four 4.5” carbon-coned drivers and a sealed ribbon tweeter. The 5B works as a 2.5-way speaker design, where two 4.5” carbon coned midrange-woofers are supported by two additional Carbon coned drivers for additional base performance. The two carbon midrange-woofers are run in series for an increased and dynamic power handling.

Scansonic MB-3.5B Floorstanding Speakers

The MB-3.5B is a slim floorstander with two 4.5” carbon-coned drivers, a sealed ribbon tweeter and two 6.5” woofers. The MB-3.5B works as a 2.5-way speaker, where the two midrange-woofers are supported by two 6.5” aluminum coned woofers. The two carbon midrange-woofers are run in series for increased power handling.

Scansonic MB-2.5B Floorstanding Speakers

The MB-2.5B is a slim floorstander with two 4.5” carbon-coned drivers and a sealed ribbon tweeter. The MB-2.5B is a 2.5-way speaker with the second woofer assisting in the power demanding bass region. The 2.5’s cabinet is heavy, braced and curved, with carbon reinforcements.

Scansonic MB-1B Standmount Speakers

The MB-1B is a stand-mount, two-way mini monitor. Scansonic's main goal was to create a small speaker that does what it does really well. The reflex port is placed in the front, and it uses special inlays that reduce noise to an extremely low level. While the speaker is small and stylish, the music performance is lively bright and bold, with a bass performance that defies its compact size. The speaker is front-ported to allow for placement near the rear wall. Please note: Speaker stands not included

Scansonic MB-10 Subwoofer

The MB-10 Subwoofer is not only great in a home cinema setup, it also blends seamless into a good stereo system. Using their knowledge and expertise in designing high-end loudspeakers, Scansonic focused on making the MB-10B reproduce bass in a more natural and “honest” way, than normally seen in subwoofers.