SPL Performer s900 Stereo Power Amplifier

The SPL Performer s900 stereo power amplifier sits in the middle of the Performer line, drawing its design and component choices from the larger SPL Performer s1200. It strikes the perfect balance between sonic excellence and performance, making it ideal for high-resolution speakers that aren’t overly power-hungry, regardless of their size. With an output of 2 x 370 W at 4 Ω (2 x 420 W at 2 Ω; 2 x 200 W at 8 Ω), the s900 has more than enough power to drive any loudspeaker with ease.  Despite its compact size, the Performer s900 is a powerhouse. It offers impressive headroom thanks to SPL's VOLTAiR technology, delivering a sound that is rich in detail, vivid, honest, and musically engaging. Key Features: Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Stereo pair of XLR inputs with input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 4 ohms impedance. Bridge Mode, means you are able to turn the two power amplifier channels into one power amplifier, allowing 450 W into 8 Ohm in mono operation mode.

SPL Elector Analog Preamplifier

The Elector is the perfect preamplifier for the lover of pure analog technology. With motorised, remote volume control, tape monitor path, retro-look-VU-meter and the all superior VOLTAiR technology the Elector brings analog sources to new life. Key Features: Three pairs of balanced inputs with XLR jacks and three standard inputs with gold-plated RCA jacks. The Elector provides two stereo output pairs (1 x XLR, 1 x RCA) for connecting power amplifiers or active loudspeakers. Tape monitor with db switch to reduce high input levels. Two mechanical UV meters with the ability to switch the display for different signal levels.

SPL Performer m1000 Monoblock Amplifier (Single)

With a power amplification of 750 W (4 Ω) [1000 W (2 Ω); 420 W (8 Ω)], this completely analog amplifier easily controls any loudspeaker. Thanks to the VOLTAiR technology the performance of the m1000 is detail-rich, vivid, honest and plain simply beautiful. Key Features: Class-AB amplifier circuit XLR balanced input Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 2 ohms impedance. 3 interchangeable decorative panels included to switch up the look of the m1000.

SPL Performer s800 Stereo Power Amplifier

This small completely analog stereo power amplifier shows everyone that size does not necessarily have anything to do with greatness. With a power amplification of 2 x 285 W (4 Ω) [2 x 185 W (8 Ω)] or 1 x 450 W (8 Ω, Bridge Mode), this amplifier easily controls any loudspeaker. Thanks to VOLTAiR technology, it is fast, precise and highly efficient with outstanding sound. Key Features: Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Stereo pair of XLR inputs with input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 4 ohms impedance. Bridge Mode, means you are able to turn the two power amplifier channels into one power amplifier, allowing 450 W into 8 Ohm in mono operation mode.

SPL Performer s1200 Stereo Power Amplifier

This impressive stereo power amplifier leads even the most demanding speakers to soundscapes beyond your expectations. With a power amplification of 2 x 520 W (4 Ω) [2 x 550 W (2 Ω); 2 x 300 W (8 Ω)], this completely analog amplifier easily controls any loudspeaker. Thanks to the VOLTAiR technology the performance of the s1200 is detail-rich, vivid, honest and plain simply beautiful. Key Features: Class-AB amplifier circuit Stereo pair of XLR and RCA inputs selected via the Input Select switch on the rear panel. Protection circuit against DC voltage and against overheating, indicated by LED's on the front panel. Input sensitivity can be adjusted in 0.5 dB steps from 0 dB to -5.5 dB. Recommended for driving speakers over 2 ohms impedance 3 interchangeable decorative panels included to switch up the look of the s1200.

SPL Phonitor x Headphone Amplifier & Preamplifier

The Phonitor x is both an outstanding headphone amplifier and an excellent preamplifier that can be used to directly drive power amplifiers or active speakers. With the optional DA converter, it not only plays from analog sources, but also directly from digital sources. The Phonitor Matrix allows speaker-like listening via headphones.  Thanks to VOLTAiR technology, it offers all this in the highest possible sound quality. Key Features: XLR (Balanced) input, RCA, and via the optional DAC768xs, USB, COAX, and OPTICAL. Stereo jack plug and for balanced-driven headphones using a 4-pol XLR jack. SPL Phonitor Matrix can correct false stereo image with an analog circuitry. Two mechanical VU meters visualize the input levels for the left and right audio channel.