Grado Prestige Gold 3 T4P Moving Magnet Cartridge

The Gold3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.   Key Features: Hand-Built in Brooklyn Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison De-Stressed Chasis Swiss Screw Machined

Grado Prestige Silver 3 Stylus

Replacement stylus for Grado Prestige Silver 3 Moving Iron Cartridge.

Grado Prestige Green 3 T4P Moving Magnet Cartridge

Both the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.   The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.   Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.   Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

Grado Opus 3 Timbre Series Cartridge

Bringing extreme levels of clarity over the full frequency range, the Opus3 bridges together entry-level and mid-range. The Opus3 is the easiest way to enter the family of our wooden cartridges.

Grado The Statement 3 Lineage Series Cartridge

After hearing the sound of the new Statement3, Grado had to reclassify it. Meet the newest member of the Lineage Series.

Grado Aeon 3 Lineage Series Cartridge

The younger sibling to the Epoch3, the Aeon3 unites new shielding techniques with sapphire, diamond, and wood in a major step forward for phono cartridge design. Key Features: Hand-Built in Brooklyn Cocobolo Wooden Housing Sapphire Cantilever Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison Swiss Screw Machined

Grado Epoch 3 Lineage Series Cartridge

The flagship Grado Epoch3 produces a dimensional sound field giving it a truly believable presentation, and combines sapphire, gold, diamond, and cocobolo wood to produce the finest hand-built cartridge ever. Key Features: Hand-Built in Brooklyn Cocobolo Wooden Housing 24k Gold Coil Sapphire Cantilever Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Four Coil Unison Swiss Screw Machined

Grado The Reference 3 Timbre Series Cartridge

Achieving fantastic accuracy and control, the Reference3 does everything the Master3 can do - but does it better thanks to specialized intricate processes while being crafted. While similar to its younger sibling in a few aspects, the Reference3 has a much longer build time since it undergoes extremely unique processes only a few of Grado's cartridges go through. This longer, more intricate practice produces a more colourful and deeper sound. When working in tandem with the special curing process and individual calibrations, they have the best cartridge in the Timbre Series.

Grado Sonata 3 Timbre Series Cartridge

The Sonata3 does everything the Platinum3 can do - but does it better thanks to an intricate processes while being crafted. While similar to its younger sibling in a few aspects, the Sonata3 has a much longer build time since it undergoes extremely unique processes only a few of Grado's cartridges go through. This longer, more intricate practice produces a more colourful and deeper sound.

Grado Platinum 3 Timbre Series Cartridge

The first step-up from the Opus3, the Platinum3 puts Jarrah wood and a twin magnet system to work for your favorite music. The Platinum3 is a great example of what the Timbre Series is made for: to start listening to your music with more clarity and depth than you’ve heard before.

Grado Master 3 Timbre Series Cartridge

Nearing the top of the Timbre Series, the Master3 achieves optimal sonic quality due to an intricate curing process and specialized materials reserved for Grado's best cartridges. Some practices they reserve for cartridges near the top of the line, and it starts here. To achieve the desired sound, Grado experimented with multiple longer curing processes that differ from the Opus3, Platinum3, and Sonata3 while using more modified materials. Each Master3 is individually calibrated after being built.

Grado Prestige Green 3 Moving Magnet Cartridge

The Green3 uses a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.   Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.

Grado Prestige Silver 3 Moving Magnet Cartridge

The Silver3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency.   Key Features: Hand-Built in Brooklyn Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison De-Stressed Chasis Swiss Screw Machined

Grado Prestige Gold 3 Stylus

Replacement stylus for Grado Prestige Gold 3 Moving Iron Cartridge.

Grado Prestige Red 3 Stylus

Replacement stylus for Grado Prestige Red 3 Moving Iron Cartridge.

Grado Prestige Green 3 Stylus

Replacement stylus for Grado Prestige Green 3 Moving Iron Cartridge.

Grado Prestige Gold 3 Moving Magnet Cartridge

The Gold3 uses a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. A machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.   Key Features: Hand-Built in Brooklyn Diamond Tipped Twin Magnet System Patented Flux-Bridge™ Ultra High Purity Copper Coil Four Coil Unison De-Stressed Chasis Swiss Screw Machined

Grado Prestige ME+ Mono Cartridge

There are many analogue lovers with record collections that include mono albums. Grado strive to have products that will fit all the needs of the analogue enthusiast.    So now, Grado offers two new cartridge models in a mono version. The MC+ and the ME+ are mounted with an elliciptical diamond. The ME+ uses one of GRADO's upgraded generating systems. This will make your records quieter and enhance the musical pleasure of these recordings.

Grado Prestige Blue 2 Moving Iron Cartridge

Both the Blue2 and Red2 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing.   Grado's OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.   Grado's OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.

Grado Reference The Reference-2 High Output Moving Iron Cartridge

The Reference Series2 of wooden cartridges are hand-crafted at Grado Labs from a Australian Jarrah wood. An intricate procedure of curing is done between production steps to achieve optimal sonic quality. This series generator/stylus module is not replaceable allowing a redesigned one-piece magnetic circuit and a reduction of chassis resonances. The Reference Series2 utilizes manufacturing and assembly techniques that result is musical perfection. The Reference Series2 should be used with only the finest equipment. Recommended tracking force 1.5 to 1.9 grams.

Grado DJ200i Moving Magnet DJ Cartridge

The Prestige model DJ200i is a superior quality DJ Cartridge from Grado. It uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing.

Grado Prestige 1 78C Stylus

Replacement stylus for Grado Prestige 1 78C MM Cartridge

Grado Statement The Reference-1 Low Output Moving Iron Cartridge

High end model in the Statement wood bodied range from Grado. Low output version, use into MC input or via step up device into MM stage. Excellent feisty alternative to a Dynavector XX2 or Lyra Delos.