Michell Gyro Turntable

Please Note: Turntable does not include tonearm or cartridge. The Michell Gyro has been in continuous development since its introduction in the early 1980s. Its journey has been defined by meticulous, incremental refinements, always aimed at maximising performance while strictly adhering to the original design ethos. This commitment has made its aesthetic iconic and its sonic quality legendary within high-end analogue playback. This latest model represents the most dramatic step in that evolution. It is not a reinvention, but a comprehensive engineering overhaul that reimagines the internal architecture. This ground-up approach delivers significant leaps in performance, operational ease, and long-term reliability. The signature Gyro look remains, yet a closer examination and critical listening will confirm the scale of this truly new machine. Key Features: Solid 19mm aerospace-grade aluminium chassis with integrated brass counterweights AI-modelled vibration control and structural optimisation Precision tonearm coupling replaces Delrin spacers Re-tuned suspension with 3.5Hz frequency and EquilibriaTM lateral damping Aluminium baseplate replaces acrylic Spider frame Large SorbothaneTM isolation feet Smoother platter edge – belt groove removed for sleeker aesthetics Motor pod and PSU redesigned with shielding, grounding, and electronic speed control Inverted bearing now features double-helix oil pumping for 2× lubrication flow

Michell Revolv Turntable

Please Note: Turntable does not include tonearm or cartridge.Perfectly situated between our minimalist TecnoDec and the flagship Gyro, the Revolv embodies the precision, clarity, and enduring quality synonymous with the Michell brand. It provides this exceptional audio performance in a streamlined, user-friendly format that is highly rewarding. Built on a precision-machined aluminum chassis, the Revolv integrates advanced technologies honed through our engineering expertise. Its design features a Delrin® platter with peripheral brass mass for stability, a grounded and shielded motor pod for electrical isolation, and Sorbothane™-dampening feet to nullify vibration. The result is a deck that retrieves tone, timing, and texture with remarkable accuracy and depth. Key Features: Solid 19mm aerospace-grade aluminium tooling plate chassis Unsuspended design for direct mechanical grounding Rigid tonearm coupling via precision-machined aluminium arm plate Advanced SorbothaneTM isolation feet with six damping nodes Inverted mono-helix oil-circulating main bearing Shielded motor pod and PSU with electronic speed selection Delrin® platter with 10mm peripheral brass weights for increased inertia Designed, engineered, and assembled by hand in the UK

Michell Apollo Phono Stage

For discerning audiophiles, the true allure of vinyl lies in the richness and warmth of analogue sound. To fully appreciate every detail and nuance, the right equipment is essential. While a premium turntable, tonearm, and cartridge are vital, the quality of your phono stage is what ensures the integrity of the music.  Crafted in the UK and meticulously designed by the Michell Audio team, the Apollo incorporates cutting-edge technology to deliver outstanding audio performance with any turntable and cartridge. This two-box design is engineered to minimise unwanted RF noise, as such interference is the most damaging external factor to the delicate circuits of a phono stage, ensuring pristine audio reproduction. Key Features: The inbuilt power supply circuitry works in harmony with the MUSE power supply to further refine and regulate the DC power High-Quality class A preamplifiers ensure precise signal handling Passive RIAA Circuit Class A Gain Stages Customisable loading and gain settings. MUSE uses a high-quality low noise toroidal transformer, advanced capacitance multiplier technology and very high-quality voltage regulators, to reduce ripple and noise, delivering two highly filtered and regulated DC outputs. Dual Filtration: It works in harmony with APOLLO's internal power supply for superior filtering and regulation. Noise Isolation: By housing the transformer separately in MUSE, any noise generation is isolated from the amplification circuits.

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoArm 2 Tonearm

The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price.

Michell TecnoDec Turntable

Please Note: Turntable does not include tonearm or cartridge. Supplied with a Rega profile armplate. The TecnoDec is Michell's entry-level turntable, and shares many features developed for its bigger sibling, the GyroDec, such as the vibration dampening, impedance-matched platter, inverted oil circulating main bearing and a free-standing motor unit. Key Features: Pure Sorbothane feet inserts. Impedance-matched platter. Free standing motor unit. Inverted oil circulating main bearing.

Michell Finger Locking Nut

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoWeight

The TecnoWeight is a great upgrade for anyone with a compatible Rega tonearm. This easy to fit counter weight system is made from heavy stainless steel and aluminium.    Please Note: This is compatible with all Rega tonearms and derivatives, except RB100 series tonearms.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.