Rega RB3000 Tonearm

Please Note: At the request of the manufacturer this item cannot be supplied by mail order. If you purchase this item, you can choose to collect it from our store or arrange a home installation. The RB3000 represents the pinnacle of Rega’s tonearm engineering, pushing the boundaries of analog design to achieve near-zero tolerances. Meticulously hand-built by a team of highly skilled technicians, the RB3000 is a masterclass in precision. It features an innovative, hand-polished aluminium arm tube designed to redistribute mass and eliminate resonance, ensuring the most stable platform possible for your cartridge. At its heart are improved, hand-selected bearings, each uniquely matched to its spindle as an interference fit. This Rega-developed method ensures there is no measurable "play" in the assembly, dramatically increasing the amount of detail retrieved from the record surface. Built without the use of adhesives to maintain maximum rigidity, the RB3000 is designed to maximise the performance of both the tonearm and your chosen cartridge (sold separately). Key Features: Meticulously hand built Hand selected bearings to be an interference fit with the paired spindle Near frictionless movement horizontally and vertically Designed for maximum performance Lifetime warranty against manufacture defects

Audio-Technica AT-LT10 Universal Headshell

The AT-LT10 is a versatile ½"-mount headshell designed for 4-pin turntable cartridges, whether they have threaded inserts or not. Its elongated through holes enable precise cartridge positioning to ensure correct overhang and optimal tonearm length. Crafted from lightweight aluminum die-cast, the body effectively minimises vibrations, while the slip-resistant finger lift allows for precise stylus placement. The AT-LT10 features OFC (oxygen-free copper) lead wires and includes mounting screws, catering to professional needs. Key Features Universal ½"-mount headshell for 4-pin turntable cartridges with or without threaded inserts Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Elongated through holes enable precise cartridge positioning and overhang adjustment OFC (oxygen-free copper) lead wires for exceptional sound quality Slip-resistant finger lift allows stylus to be placed precisely on the record Includes mounting screws

Ortofon AS-309R 12" Inch Tonearm

The AS-309R 12" Inch Reference tonearm is the result of years of extensive experience and expertise in the audio engineering field. Each part and component of the tonearms has been carefully upgraded with materials selected to minimise unwanted vibration and distortion, thus ensuring a clear, precise, and accurate sound. The AS-309R has undergone meticulous attention to precision and durability of every part and assembly, guaranteeing lasting durability for many years to come.

Ortofon AS-212R 9" Inch Tonearm

The AS-212R 9" Inch Reference tonearm is the result of years of extensive experience and expertise in the audio engineering field. Each part and component of the tonearms has been carefully upgraded with materials selected to minimise unwanted vibration and distortion, thus ensuring a clear, precise, and accurate sound. The AS-212R has undergone meticulous attention to precision and durability of every part and assembly, guaranteeing lasting durability for many years to come.

Audio-Technica AT-HS3 Headshell - Black

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Black headshell design

Moth Group TA3 Tonearm

Key Features: Redesigned vertical bearing housing Integrated arm clip Improved spring housing Extreme stability and almost friction free movement Hand selected bearings

Moth Group TA2 Tonearm

The Moth TA2 tonearm uses a custom one piece aluminium arm tube, carefully manufactured to optimise performance and reduce stress on the precision bearings. Each tonearm is meticulously hand assembled using custom tools and precision torque settings to guarantee optimum performance. This level of care ensures perfect tracking and maximises the amount of information that the cartridge can extract from the record groove.

Dynavector 507 MKII Tonearm

The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507 which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984.

VPI Finger Lift

VPI JMW-9 Metal Uni-Pivot Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Effective Mass: 10.2 - g Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36%

VPI FB-12 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 300 - mm Effective length: 313.0 - mm Effective mass: 12.5 - g Overhang: 13 - mm Offset angle: 17.37 - degrees Average RMS distortion: 0.267% Please Note: VTA base not included.

VPI FB-12 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 300 - mm Effective length: 313 - mm Overhang: 13 - mm Offset angle: 17.37 - degrees Average RMS distortion: 0.27% Please Note: VTA base not included.

VPI FB-10 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 258 - mm Effective length: 273.4 - mm Overhang: 15.4 - mm Offset angle: 19.98 - degrees Average RMS distortion: 0.31% Please Note: VTA base not included.

VPI FB-10 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 258 - mm Effective length: 273.4 - mm Effective mass: 10.7 - g Overhang: 15.4 - mm Offset angle: 19.98 - degrees Average RMS distortion: 0.311% Please Note: VTA base not included.

VPI FB-9 Gimbal Fatboy Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36% Please Note: VTA base not included.

VPI FB-9 Uni-Pivot Fatboy Tonearm

Technical Specifications: Pivot to spindle: 223 - mm Effective length: 240.7 - mm Effective Mass: 10.2 - g Overhang: 17.7 - mm Offset angle: 22.85 - degrees Average RMS distortion: .36% Please Note: VTA base not included.

Pro-Ject VTA-IT Tonearm Spacer

The VTA-IT is a 1.5mm tonearm spacer, allowing you to increase the vertical tracking angle of your turntables tonearm. With VTA-IT you will be able to install a larger variety of cartridge types on your tonearm or headshell.  Please Note: The installation of “VTA-IT“ should be done by an experienced technician.  Compatibility: Debut I-III Debut Carbon Debut Carbon EVO Essential I-III (only standard configurations) Required Tools: Philips #1 Screwdriver & 5.5mm Nut Driver Wrench

Pro-Ject 12CC Evolution Tonearm

The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing. Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre. Conical armtube avoids standing wave reflections. Inverted bearing design with four ABEC7 spec ballraces. Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. Sorbothane® -damped counterweight effectively counteracts unwanted resonances. Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. Straight armtube reduces toe-in error. Silicone-damped armlift can be adjusted to suit arm height. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw

Pro-Ject 10CC Evolution Tonearm

The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre. Conical armtube avoids standing wave reflections Inverted bearing design with four ABEC7 spec ballraces. Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. Sorbothane® -damped counterweight effectively counteracts unwanted resonances. Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. Straight armtube reduces toe-in error. Silicone-damped armlift can be adjusted to suit arm height. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.

Pro-Ject 9CC Evolution Tonearm

Pro-Ject's 9" precision tone arm with carbon-fibre armtube is efficiently designed to lead parasitic vibrations away from the cartridge into the mounting board which guarantees the precise tracking of the record grooves by the needle and also facilitates fine adjustment of vertical and horizontal tracing. Key Features: The headshell and armtube are fashioned from a single piece of carbon-fibre Conical armtube avoids standing wave reflections Inverted bearing design with four ABEC7 spec ballraces Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonance Sorbothane damped counterweight effectively counteracts unwanted resonances Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracking angle) Single Screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell Straight armtube reduces toe-in error Silicone damped armlift can be adjusted to suit arm height The internal wiring consists of flexible high purity copper from the headshell right through to the gold plated phono sockets Available with 5-pole standard socket, flying lead or terminal with phono sockets and earth screws

Michell VTA Adjuster 3

Please Note: This is compatible with Rega tonearms using the redesigned three point fixing base such as the RB220, RB330. The Michell VTA adjuster 3 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell VTA Adjuster 2

Please Note: This is compatible with Rega tonearms and derivatives using the original three point fixing base such as the RB202, RB303. The Michell VTA adjuster 2 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoArm 2 Tonearm

The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price.

Audio-Technica AT-LH18H Headshell

18g adjustable through hole type headshell with OFC lead-wires. Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Audio-Technica AT-LH15H Headshell

15g adjustable through hole type headshell with OFC lead-wires.   Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Audio-Technica AT-LH13H Headshell

13g adjustable through hole type headshell with OFC lead-wires.   Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Rega RB880 Tonearm

Designed using the latest 3D CAD & CAM technology,the new RB880 is the culmination of almost 40 years of tonearm design experience. This tonearm features a new aluminium vertical bearing housing, a redesigned sleeve and vertical bearing shaft (both manufactured from stainless steel) to improve mounting stability and overall rigidity.

Pro-Ject Signature Tonearm

The Signature tonearms from Pro-Ject Audio Systems offer true audiophile sound and striking style. They represent the absolute best performance possible. Key Features: Single-pivot tonearm design with minimal friction Available in 10" and 12" length Stunning high-gloss finish Non-magnetic low resonance construction Accomodates a wide range of cartridges, including SPU models Aluminium headshell with built-in fingerlift included High-conductivity Oxygen-Free Copper (OFC) headshell cables included Built-in 5-pin DIN connector (tonearm cable not included) VTA, azimuth and overhang adjustment all easily accessible Selection of set-up tools included

Rega RB330 Stainless Steel Counterweight

Replacement counterweight for the RB330 tonearm.   Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.

Van den Hul The D-501 RCA-RCA Tonearm Interconnect

Balanced Hybrid conductor, shielded, extremely flexible tonearm connection cable in metal and LSC (carbon) construction. With durable black HULLIFLEX outer jacket.

Van den Hul The D-501 Silver RCA-RCA Tonearm Interconnect

Same construction as the D-501 HYBRID, however, the two inner multistrand conductors are made of the highest grade Matched Crystal Silver. With durable black HULLIFLEX outer jacket. This cable is terminated with RCA-RCA connections.

Rega RB110 Mild Steel Counterweight

Replacement counterweight for the RB110 tonearm.   Please Note: The RB110 tonearm comes as standard on the following turntables. Planar 1 Planar 1 Plus This counterweight is also compatible with the RB101 tonearm.

Audio-Technica AT6006R Tonearm Safety Raiser

AT6006R Tonearm Safety Raiser.   Key Features: Lifts tonearm automatically at the end of a record, protecting stylus tip Hydraulic lift with rubber lift bar operates safely and smoothly Can be mounted on a variety of turntables with different tonearm heights

Van den Hul The MSS-7 Tonearm Cable

A 36 gauge, 7 strand extremely flexible interconnect wire, available in 4 colours: transparent, blue, red and green. Each of the strands is made of a very high grade of Matched Crystal (MC) OFC with a dense and very pure silver coating.   How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m.  We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require. This cable is unterminated.

Rega Three Point Tonearm 2mm VTA Spacer

A 2mm stainless spacer, laser cut from 2mm stainless steel or anodised black aluminium. Fits all Rega three point tonearms including the 2016 range of Planar turntables. This spacer replaces the previous plastic spacer and offers better performance and support for the tonearm. Please Note: Rega turntables spacers should not be necessary unless you are you using an exceptionally deep bodied cartridge from another manufacturer.

Well Tempered Lab LTD Tonearm

LTD is a highly refined version of the Well Tempered Lab tonearm, featuring the new Symmetrex configuration.  

Rega RB220 Mild Steel Counterweight

Replacement counterweight for the RB220 tonearm.Please Note: The RB220 tonearm comes as standard on the following turntables. Planar 78 Planar 2 This counterweight is also compatible with the RB202 tonearm.

Rega RB880 Stainless Steel Counterweight

Replacement counterweight for the RB880 tonearm. Please Note: The RB880 tonearm comes as standard on the following turntables. Planar 8 This counterweight is also compatible with the RB808, RB330 and RB303 tonearms.

Rega RB3000 Tungsten Counterweight

Replacement counterweight for the RB3000 tonearm.   Please Note: The RB220 tonearm comes as standard on the following turntables. Planar 10 This counterweight is also compatible with the RB2000 and RB1000 tonearms.

Audio-Technica AT-HS3 Headshell - Red

Aluminium die-cast headshell, designed for AT-LP3. Key Features: Angled shape suitable for AT-LP3’s straight tonearm Lightweight aluminium headshell suitable for 1/2" mount cartridges and 4-pin turntable arms. Finger lift allows precise stylus placement Vivid red headshell design

Rega RB330 Tonearm

Rega's team have worked tirelessly to improve every aspect of this new tonearm. Offering improved ergonomics, usability and sonic performance. Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated arm clip and an improved spring housing with easier to read numbers. Other improvements include a Rega made, low capacitance phono cable terminated with high quality 'Neutrik' plugs, improved lower friction, precision horizontal and vertical bearings and a re-designed 100g mild steel balance weight.

Rega RB220 Tonearm

The RB220 is the latest incarnation of Rega's most popular tonearm.   The latest design takes full advantage of their brand new arm tube and the current three point arm mounting system. Each RB220 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way beyond the expectations of a product at this price point.

Pro-Ject Adjust-IT Tonearm Bearing Adjustment Tool

Precision machined tonearm bearing fine adjustment tool. Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment, when bearings are misadjusted, because of unassured transport of a turntable.

Rega RB330 Mild Steel Counterweight

Replacement counterweight for the RB330 tonearm.   Please Note: The RB330 tonearm comes as standard on the following turntables. Planar 3 - Mild Steel Planar 6 - Stainless Steel This counterweight is also compatible with the RB303 tonearm.

Audio-Technica AT-LH15/OCC TechniHard Headshell

15g TechniHard™ adjustable headshell with AT6101 quad wire.   Key Features: Aluminum headshell with hard anodized finish reduces unwanted vibration Equipped with Oxygen Free Copper (OFC) lead-wires for improved audio transmission Non-threaded holes in headshell fits well with cartridges with threaded holes such as the AT-OC9X series. Adjustable cylinder enables precise azimuth and overhang setting Available in three weights: 13 g (AT-LH13H), 15 g (AT-LH15H), and 18 g (AT-LH18H) for optimal compatibility with your cartridge/tonearm requirements

Rega RB808 Tonearm External Rewire

Tonearm rewire - Prices only applicable to original Rega wiring damaged accidentally - other charges may apply.   Price includes supply, fitting cable and full test.   Requires your tonearm to be sent in.

Rega RB303/330/700 Tonearm Internal & External Rewire

Internal and external tonearm rewire - Prices only applicable to original Rega wiring damaged accidentally - other charges may apply.   Price includes supply, fitting cable and full test.   Requires your tonearm to be sent in.

Rega RB101/110/220 Tonearm Internal & External Rewire

Internal and external tonearm rewire - Prices only applicable to original Rega wiring damaged accidentally - other charges may apply. Price includes supply, fitting cable and full test. Requires your tonearm to be sent in.

Van den Hul The MCS-150M Tonearm Cable

The MCS 150M consists of 7 individually insulated very pure matched crystal silver strands each 80 micron in diameter incl. insulation. Being less susceptible to bending damage, its thinner extruded strands give this multi-strand version even a better sound quality compared to the MCS 150S.   How to Order: This product is priced and available to buy by the metre. After adding to your basket, enter the total quantity required. If you need a 10m pair then order 20m.  We will supply the total quantity ordered in one piece so that you can then cut it to the paired lengths that you require.

Michell Finger Locking Nut

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base such as the RB250, RB300.

Nottingham Analogue Ace Space Tonearm

The Ace Space Arm design uses side stabilizer bars and tiny ball bearing chases to maintain azimuth. Nottingham Analogue have also developed a proprietary damping material, the viscosity of which is such that it does not flow and does not require 'settling time'. This material is applied to the centre pivot and the stabilizer bars.

Rega Three Point Tonearm Plastic VTA Spacer

All in one 2mm, 4mm, 6mm and 8mm height adjustment spacer for Rega three point tonearms. When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our "Rega arm spacers" to achieve the correct arm height.

Michell VTA Adjuster 1

Please Note: This is compatible with Rega tonearms and derivatives using a threaded base, such as the RB250, RB300. The Michell VTA adjuster 1 allows you to easily adjust the height of your tonearm, so it is perfectly level no matter what cartridge you choose to use. Correctly setting the vertical tracking angle (VTA) and subsequently the stylus rake angle (SRA) for your cartridge, allows the stylus to perfectly track the vinyl groove, optimising the amount of detail extracted from the recording.

Michell TecnoWeight

The TecnoWeight is a great upgrade for anyone with a compatible Rega tonearm. This easy to fit counter weight system is made from heavy stainless steel and aluminium.    Please Note: This is compatible with all Rega tonearms and derivatives, except RB100 series tonearms.

Nottingham Analogue Ace Anna Tonearm

The Ace Anna Arm design uses side stabilizer bars and tiny ball bearing chases to maintain azimuth. Nottingham Analogue have also developed a proprietory damping material, the viscosity of which is such that it does not flow and does not require 'settling time'. This material is applied to the centre pivot and the stabilizer bars.

Nottingham Analogue Interspace Tonearm

The Interspace Tone Arm combines an ultra light weight carbon fibre arm tube with a damped uni-pivot bearing and is a scaled down version of the Ace Space arm.

Rega Single Point Tonearm 2mm VTA Spacer

Arm Height Adjustment spacer for RB250 and RB300 - size 2mm.   When Rega arms are fitted to turntables from other manufacturers it may be necessary to add Rega arm spacers to achieve the correct arm height.   Circular spacers are available for the RB250 and RB300 in thickness' of 2mm. An arm 'Sleeve nut' is also available for circumstances where the arm base does not protrude below the arm mounting board.   Please Note: Turntable spacers are not necessary on all Rega turntables.