Michell GyroDec Suspension Springs and Adjuster Kit

Upgrade kit for original specification GyroDecs with single-piece steel suspension pillars, This kit now includes rubber-coated suspension springs. This upgrade simplifies adjusting the chassis height and spring position, enabling you to perfectly set up your turntable. With the turntable now effectively supported on three pin points, performance is also enhanced. Unlike the original design, the suspension pillar consists of three parts: a suspension spindle, thrust ball, and hollow pillar. The spindle is fixed to the base of the turntable, with the thrust ball at its top. The hollow pillar encases this assembly and supports the spring, which in turn holds the chassis. This configuration provides a three-position, high-pressure, point contact suspension system, minimising structural vibrations from reaching the sensitive components of the turntable.

VPI Magic Lube Grease

1Oz. Plastic bottle of bearing lubricant for VPI turntables. You should re-lube your turntable bearing at least once a year to decrease wear. It also helps with speed regulation.

Pro-Ject Pulley 50Hz

The pulley is a precision-engineered component aimed at taking the rotating force of the motor and transferring it to the sub-platter or platter of the turntable - making the record spin at either 33 1/3 or 45 RPM. Almost all replaceable Pro-Ject pulleys are secured in place with a small grub screw, for fixing to the motor shaft - others need to be glued into place.

Pro-Ject Box Design Vinyl NRS Box S3

The Vinyl NRS Box S3 is designed with the sole purpose of bringing enjoyment back to older vinyl records that may have worn to a point where they are now impeded by high surface noise and audible crackling, even when clean. With its sophisticated digital signal processing, you can listen to those records again like new. Key Features: NEW De-Crackling function to reduce clicks NEW noise reduction for vinyl records NEW reduces noise of the turntable drive Processing based on DSP with 24 bits 96 kHz sampling rate for precise processing Galvanic pure bypass if switched OFF Ideal transfer characteristics and linearity De-Crackling with adjustable sensitivity Line-level operation Compact design in standard S3-line case Full aluminium housing Available in silver or black

Pro-Ject Debut Alu Sub-Platter Upgrade

The Debut Alu Sub-Platter lifts the performance of any Debut turntable to the next level. The diamond cut aluminium sub-platter is machined to the highest tolerances, for greater performance and reliability over the standard supplied sub-platter. Key Features: Suitable for all Pro-Ject Debut turntables Precision machined out of aluminium to the highest tolerances Adds more mass and further dampens unwanted resonances Increases speed accuracy and speed stability (Wow & Flutter)

Pro-Ject X1/X2 Aluminium Upgrade Sub Platter

The Alu Upgrade Sub Platter transforms your turntable to the next level. The diamond cut aluminium sub-platter can be machined to much improved and higher tolerances and is a substantial upgrade to regular sub-platters. Key Features: Precision machined out of aluminium to the highest tolerances Adds more mass and further damps unwanted resonances Increases speed accuracy and short-term speed stability (Wow & Flutter)

Pro-Ject Grease-IT Inverted Bearing Lubricating Grease

A turntable is a delicate thing and needs proper care. The motor is moving the platter and the bearing‘s lubrication is being worn off over time, this is caused by many factors, such as climate and humidity.  Key Features: Lubricating grease for inverted bearing systems Keeps your turntable platter spinning smoothly Supplied as a pre-filled syringe

Pro-Ject S/B Pulley For Speedbox 50Hz

The 78RPM pulley has been designed for Pro-Ject turntables which can rotate at 78RPM when combined with the Pro-Ject Speedbox.

Pro-Ject Acryl-IT E Platter For Elemental / Primary and Essential II Turntables

The perfect upgrade for any owner of the Elemental, Primary or Essential II turntable. The use of acrylic reduces tinny frequencies and helps accentuate the mid-range better.

Pro-Ject Lube-IT Turntable Spindle Oil

Formerly known as Grease-IT, this platter bearing oil is a high-tech lubricant, allowing for drastically reduced friction around the main bearing. Now your turntable can spin at a constant velocity, improving its performance.   All you need is a couple of drops, and the performance will be solid for years to come.

Roksan LX7 Turntable Main Bearing Oil Kit

This Turntable Main Bearing Oil Kit from Roksan ensures smooth running and pitch stability of your Roksan turntable platter.

Michell Synthetic Turntable Bearing Oil

Michell use a proprietary synthetic oil to lubricate the main bearing in all their turntables. The oil has to be a precise viscosity to enable the inverted bearings to circulate the oil correctly.

Van den Hul The Special Turntable Spindle Oil

Key Features: 30ml No mechanical contact between the spindle and the bearing bush. This flotation property minimises bearing noise and noticeable increases audio quality. Ø 1 micron microscopic spheres of zirconium oxide carry oxygen ions. This creates an actual physical separation between the spindle and the bearing bush. The oil viscosity alone reduces the friction between metal parts (spindle and bearing bush). It offers temperature stability and remains unadulterated through time and use. Perfect for higher clearance type platter spindle bearings. (For tighter clearances use Van Den Hul's TLF Type II)

Van den Hul The Lower Friction Oil II

VDH's 'The Lower Friction' (TLF) is a broad spectrum applicable super oil, especially intended to reduce bearing friction by forming an extremely stable lubrication layer between mechanical parts. Their TLF oil types are particularly suitable for close fitting - tight clearance bearings. The oils offer a superior combination of high performance properties, like for instance a very high resistance against breaking or penetration of the oil film: they can handle a pressure of around 180 - 200 kg/cm² at around 350 degrees Celsius (662 °F) without breaking away. The oils have a viscosity of just one third to one quarter of that of water: they easily spread and build a steady nano-thin layer on each surface. They don't contain Teflon, graphite or any other particles, don't oxidize and don't age. The normal operating temperature ranges up to 175 degrees Celsius (347 °F).

Rega 45RPM Adaptor

The record adaptor has been designed to be used with your 45rpm records that no longer have the centres, enabling you to play your old favourites.   The adaptor is simply fitted over the spindle of your turntable and the record will fit the outside of the adaptor. Then simply sit back, switch on and enjoy the music.

Michell GyroDec/Orbe Arm Plate Decoupling Kit

Available to original GyroDec / Orbe owners whose turntable has the arm plate attached using long screws and straight through spacers.   The new assembly isolates the arm plate from the chassis of the turntable using a redesigned arm plate spacer.

Pro-Ject Acryl-IT Turntable Platter

Upgrade your Debut or 1Xpression turntable to Esprit-standards. Acryl it is made from acrylic with satinised surface and brings a more liquid sound that leaves no space for platter resonances. Key Features: Suitable for Debut and 1Xpression turntables Substitutes metal platter Inert material avoids resonances Dent for label implemented Ideal for use with Clamp it Audiophile sound tuning Optical upvaluation