Fast Delivery
Demonstration Facilites
Part Exchange Welcome

Thorens TD 1500 Turntable

Code: THOR-TD-1500
  • £1,999.00
  • (FREE UK Delivery)
  |   Usually dispatched within 24 hours
Loading...

In 1965, the Thorens TD 150, an inconspicuous little turntable, came on the market and thus started a technical revolution in record player manufacturing. For the first time, a spring-suspended sub-chassis with an inner platter driven by a flat belt was used in a mass-produced unit. The principle proved to be very successful and found many imitators in the years since.

Like its famous predecessor, the new Thorens TD 1500, which will be operated purely manually, features a sub-chassis that decouples the turntable and tonearm shelf from the motor and frame by means of three conical springs. In contrast to the TD 150, these springs can be adjusted from above through corresponding holes in the platter, which makes correct adjustment much easier.

Key Features:

  • Sub chassis with three conical springs
  • Belt drive with polished precision belt
  • Massive 1.4 kg and 22mm-thick Die-cast aluminum platter
  • Pre-installed cartridge Ortofon 2 M Bronze
  • Electronical controlled motor
  • balanced (XLR) and unbalanced (RCA) output
  • Thorens precision tonearm TP 150

The speed of the DC motor is electronically monitored by an incremental encoder and deviations, e.g. caused by a broom, are automatically corrected. This also enables very good wow and flutter values. As a real unique selling point in its class, the TD 1500 has XLR outputs in addition to the usual pair of RCA jacks, thus enabling true balanced operation with a suitable MC cartridge.

The new TP 150 tonearm is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted.

The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing.

A high-quality and pre-adjusted 2M Bronze pickup from the Danish pickup specialist Ortofon, is also supplied as standard. This proves to be a perfect playing partner due to its naked diamond with Fine Line cut.

Technical Specifications:
  • Drive: Belt
  • Motor: DC Motor
  • Speeds: 33 1/3 and 45 rpm
  • Wow & flutter: 0,08 % DIN / WRMS
  • Platter: Aluminum Die-cast
  • Diameter of Platter: 12“, 300mm
  • Tonearm: Thorens TP150
  • Type: Static Balance, J-shaped
  • Effective Length: 9“ / 232.8 mm
  • Effective Mass: 15 g
  • Cartridge weight: Max 30 g
  • Overhang: 17.8 mm
  • Anti-skating Adjustment: Counterweight guided with thread through ruby bearing
  • Cartridge Type: Ortofon 2M Bronze, MM
  • Stylus Construction: Fine Line, nude
  • Frequency Response: 20Hz - 29kHz
  • Channel Separation: >26dB / 1kHz
  • Channel Balance: 1 dB / 1kHz
  • Vertical Tracking Angle: 20°
  • Supported Load Impedance: 47k Ohm
  • Output Voltage: 5.5mV (1kHz, 3.54cm/sec.)
  • Tracking Force: 1.5g +/–0.2g
  • Cartridge Weight: 7,2g
  • Headshell Weight: 13.5g
  • Connector: RCA/Cinch XLR
  • Power: AC 100 - 240V, 50/60Hz
  • Power Consumption: 6 W
  • Overall Dimensions (W x D x H): 440 x 370x 180mm

We endeavour to despatch same day for orders placed up to 2pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is received. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail 24 or special delivery. Larger items are delivered using a courier service such as DPD or UPS. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties can apply for shipments to any countries outside of the UK depending on where the product you have bought is made. Customers are responsible for all taxes and duties incurred when the items enter their country.

COLLECT IN STORE OR HOME INSTALL:At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock. 

Top