(0)
£0.00

Audio Technica AT-LP3 Belt Drive Turntable

code: n/a
From £165.83 (FREE UK Delivery)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm's removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Balanced straight tonearm with hydraulically damped lift control and lockable rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable modes for moving magnet and moving coil cartridges
  • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
  • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback colouration
Technical Specifications:
 
Turntable
  • Type: Fully Automatic, Belt-Drive
  • Motor: DC motor
  • Speeds: 33-1/3 RPM, 45 RPM
  • Turntable Platter: Die-cast aluminium
  • Wow and Flutter: Less than 0.2% WRMS (33 1/3 RPM) at3kHz
  • Signal-to-Noise Ratio: > 60 dB
  • Output Level: “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec / “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
  • Phono Pre-Amp Gain: 36dB nominal, RIAA equalised / 56dB nominal, RIAA equalised
  • Power Supply Requirements: 220 to 240 V / 50, 60 Hz
  • Power Consumption: 2W
  • Dimensions: 435 mm ×353 mm×128 mm (W×D×H)
  • Weight: 5.2kg
  • Accessories Included: Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
Cartridge & Stylus
  • Model: AT91R
  • Type: VM Dual Magnet
  • Output Voltage: 3.5mV (mV at 1kHz, 5 cm/sec)
  • Vertical Tracking Force Range: 1.5 to 2.5g (standard 2.0g)
  • Stylus Construction: 0.6 mil bonded conical
  • Cantilever: Aluminium pipe
  • Recommended Load Impedance: 47,000 ohms
  • Weight: 5.0g
Headshell
  • Model: AT-HS3
  • Weight: 11.1g
  • Overhang Adjustment: 8mm
Tone Arm
  • Type: Static balanced straight shaped with soft damping control
  • Effective Length: 221.5mm
  • Overhang: 19mm
  • Maximum Tracking Error Angle: Less than 3°
  • Stylus Pressure Adjustment Range: 1 to 4g
  • Applicable Cartridge Weight: 14.5 to 20g
  • Anti-skating Range: 0 - 3g

We endeavour to despatch same day for orders placed up to 2pm on available stock items (items with stock message "Usually dispatched within 24 hours"). Please remember to check with us first for a physical stock check if next day delivery is important to you. Any items with stock message "Usually dispatched within 72 hours" are items that we do not hold in stock but order in from the importer or manufacturer as soon as a customer order is recieved. Occasionally these may be delayed beyond 72 hours due to importer/manufacturer stock levels but we will inform you as soon as we can if this is the case.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Non Mainland locations - Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland may take a day or so longer and are not Free of Charge. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Turntableworld or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

COLLECT IN STORE OR HOME INSTALL:At the request of the manufacturer some items cannot be supplied by mail order but you can click and buy them and then elect to collect them from our store or arrange a home install (if applicable). Applicable items clearly state that they are Collect in store or home install. Once ordered you will receive a message prompting you to contact us by phone or email to arrange for us to deliver and install or to reserve and collect from our store at your convenience, you will also be advised of the delivery time / stock availability as not all Home install / collect in store items are held in stock. 

Be the first to review Audio Technica AT-LP3 Belt Drive Turntable. Write a review ›