(0)
£0.00

Ortofon TA110 Tonearm

code: ORTTA110
£1,150.00 (FREE UK Delivery)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
  • New Ortofon 9" Tonearm

Ortofon TA110 9" Tonearm

Ortofon's material know-how is the first area of the Ortofon technology that was applied when developing the TA-110. As a specialist in technical rubber, Ortofon used one of its special rubber compounds when creating the specially shaped rubber with high vibration dampening properties. The rubber pieces are produced at the Ortofon technical rubber facilities in Nakskov.
The second area of Ortofon technology is the extensive knowledge of vibration properties and characteristics. Ortofon has acquired this know-how via the developement of Bone conductors for the hearing aid industry. By using this knowledge and the related computer programs that simulated vibration in different shapes and materials, Ortofon came up with an optimized TA-110.
The TA-110 is given a precision machined slit in the middle of the aluminium tube. A piece of Ortofon's special vibration damping rubber is inserted into the slit. An armtube without slit and rubber damper is symmetrical in a vertical and lateral plane with respect to vibrations. The slit breaks this symmetry, and mounting the rubber insert gives the desired damping.
Features

TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings
TA-110 has a standard 5-pin DIN connector for tonearm cable
The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
Counterweight with Inner/Outer scale
Inner scale to be applied with main counterweight
Outer scale to be applied when extra mass ring is added
Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
Counterweight with Inner/Outer scale

The counterweight should be attached onto the rear of the tonearm with the inner number scale facing forward. If the extra mass ring is needed, it must be installed prior to attaching the counterweight to the tonearm. The extra mass ring should be installed on the back of the counterweight and may need to be twisted slightly to facilitate the installation. Ensure that the extra mass ring fits tightly to the thick part of the counterweight.
The TA-110 can ideally be combined with MC Windfeld, MC A90 and the new Ortofon Xpression.
The combination of Xpression, ST-80 SE Moving Coil transformer and TA-110 gives a supreme experience.

TA-110 Technical data

Effective mass without headshell 3.5 g
Mass of supplied headshell 15.5 g
Effective armlength (distance between the stylus and pivot point): 231.0 mm
Mounting distance (distance between the pivot point and turntable center): 213.0 mm
Offset angle: 23.9 degrees
Overhang: 18.0 mm
Tracking force adjusting range (direct reading): 0-3 g
Height adjustment range: 35-55 mm
Diameter of the armbase mounting hole: 19-20 mm
Diameter of the center shaft of tonearm: 18.0 mm
Inner null point: 66 mm
Outer null point: 120.9 mm
Counterweight for cartridge + headshell mass between 21 and 28 g included
Headshell LH-2000E included
Headshell LH-2000E weight: 15.5 g
TA-110 total weight including headshell: 470 g
Set of tonearm cables 6NX-TSW-1010 included
Extra mass ring for heavier cartridges included
Extra mass ring weight 45g

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review Ortofon TA110 Tonearm. Write a review ›