(0)
£0.00

Clearaudio Balance + MM/MC Phono Stage

code: CDEELO23
£2,140.00 (FREE UK Delivery)
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

With its superior performance, the Balance + phonostage would not be out of place in any professional studio.

For maximum dynamic headroom and RIAA accuracy of less than 0.1dB, the components are fitted directly on the circuit board in custom aluminium blocks to minimise electrical and mechanical influences and reliably keep disturbances out of the amp.
 
A precision tool for sound engineers which performs equally well as part of a domestic high-end system. The elegantly designed Balance + has a headphone output on the front panel and a matching second chassis to house its external power supply. The addition of the Accu+ battery power supply makes the Balance + a three-chassis phonostage with an even higher performance. Fitted with a high quality volume control the Balance + can also be directly connected to a power amplifier acting as a control preamp. The Balance + phonostage reproduces the entire range of audiophile recordings unaltered.
 
Technical Specifications:
  • Amplification @ 1 kHz - 44 dB (MM mode) / 63 dB (MC mode)
  • Input Impedance - 47 kOhm / 220 pF (MM mode) 510 Ohm / 220 pF (MC mode)
  • MM / MC Input - switchable (on bottom panel)
  • RIAA - delay time: 75 μs / 318 μs / 3180 μs
  • RIAA Accuracy - ± 0.1 dB
  • Distortion - 0.001% (IEC A)
  • Signal To Noise Ratio - 89 dB (MM Mode) / 74 dB (MC Mode)
  • Channel Separation - > 92 dB (@ 1 kHz) / opposed channel hot-wired
  • Max. Output Voltage - 10.5 V (@ 1 kHz)
  • Subsonic Filter - 20 Hz: –3 dB / Oct
  • Power Supply - ± 18 V DC (external power supply)
  • Output Connections - Unbalanced (RCA) / Balanced (XLR)
  • Power Consumption - Max. consumption: 6.6 Watt / Consumption in operation: 6.6 Watt / Off mode: 0.0 Watt (turned off at rear panel)
  • Total Weight - Approx. 1.8 Kg (Preamplifier) / Approx. 2.5 kg (Power supply)
  • Dimensions (W/D/H in inches) - Preamp: 7.09 x 8.66 x 2.17 / Power Supply: 7.09 x 7.28 x 2.17
  • Dimensions (W/D/H in mm) - Preamp: 180 x 220 x 55 / Power Supply: 180 x 185 x 55
  • Warranty - 3 years*
* Only if the Manufacturer's guarantee card is filled out correctly and sent back within 2 weeks to Clearaudio.

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review Clearaudio Balance + MM/MC Phono Stage. Write a review ›