(0)
£0.00

Pathos Acoustics Logos MKII Integrated Amplifier

code: n/a
From £3,599.00 (FREE UK Delivery)
Item out of Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout
Type 

Output Power 
Frequency response 
Max input voltage 
Input sensitivity 
Input impedance 
Output polarity 
Volume regulator 
Dumping Factor 
THD 
S/N Ratio 
Power requirements 

Connections: 
Analogue inputs 
Digital inputs 
Outputs 

HiDac Specifications: 
Sampling frequency 
Resolution: 
Minimal requirements 
USB requirements 

Dimensions: 
Amplifier: 
Packed 
Weight (net / packed) 

Integrated stereo amplifier, Hybrid technology. 
Preamplifier stage: Tube (2x6922 ECC88), class A 
Final stage: Mosfet, class AB 

2x110 W RMS@8Ohm (Both channel driven) 
5Hz - 140KHz ± 0,5dB 
6V RMS 
500mV RMS (39dB Gain) 
32KOhm unbalanced, 20KOhm balanced 
Non- inverting. Balanced pin 2 + 
Burr Brown PGA2310 (100 steps) 
360@8Ohm 
0,02% @ 1W; 0,2% 110W 
>90dB 
200W @ 100WPC / 130W @ zero volume < 0,5W@standby 

2 balanced XRL line, 5 unbalanced RCA line 
1 USB port type "B", 2 SPDIF coaxial 
1 Pre out stereo line, 1 sub out mono line 

44.1, 48, 88.2, 96, 176.4, 192kHz 
16 to 24 bits 
1.3GHz CPU clock, 1GB RAM 
2.0 USB port 

420mm (D) x 430mm (W) x 170mm (H) 
600mm (D) x 600mm (W) x 350mm (H) 
28Kg / 30Kg 

Close to the spirit that has animated since its origin has always been involved in the search for new solutions and improvement of its machines for Music. E with this approach that Pathos after more than ten years after the introduction of the integrated Pathos Logos presents its evolution MKII. Pathos is not usual to introduce updated versions of its models except in the presence of substantial and meaningful new ideas to offer its loyal customers and in general to all lovers of good music. Indeed behind the usual original design the new Logos MKII hide the introduction of a series of new solutions some thinked in order to further enhance the sound of the amplifier and others to meet the demand for versatility and practicality that a demanding clientele pretends that is also present in a high-end device. As regards the first kind of solutions adopted in the new Logos we find an increased voltage of anodic polarization of the valves in order to optimize the working point of the same and obtain greater linearity and thus a general improvement of the sound in particular an increase of the consistency and definition. Stabilized power supply for preamp valve and a more accurate collocation of electrolytic capacitors throughout the signal path (and in particular close to each mosfet) allow to have a valuable reserve of "quick energy" that while listening they mean better dynamics, detail and sense of rhythm. 

Numerous innovations also regarding the practicality of use that they assist pleasantly the owner in the use of the amplifier, we find: volume levels can be stored for each input, the gain differentiation between digital and analog inputs so as to ensure homogeneity of the a level between the different sources used, standby function from the remote control respectful of energy consumption limits imposed by the latest EEC regulations, ability to have an high quality DAC 24bit-192Khz integrated into the device (optional). Also increased the already rich set of connections with the addition of 2 SPIDF digital inputs and 1 USB input which allows, together with the internal DAC ( optional), versatility in the management of digital sources really meaningful and who participate with the Logos MkII to be ideal amplifier for the use of digital Music. A new protection has also been implemented against short circuits and overloads by a Hall effect sensor that allows to the device to protect itself against shorts caused by speakers and by internal malfunctions preserving in this case also the speakers and at the same time without diminishing the quality of the musical signal. Recall that the Logos is a hybrid amplifier of 110W per channel into 8 ohms and 220W into 4 ohms with ECC88 preamp valves, end-stage class A / B Mosfet strongly polarized, fully balanced signal until the valve that allows you to take full advantage of a balanced source as Pathos Digit and Pathos Endorphin, volume control purely resistive analog circuitry with digital control and input and output impedance constant, lamellar transformer resin and encapsulated to zero dispersions, brightness display adjustable and all functions remote controlled.

We endeavour to despatch same day (for orders placed up to 2pm) on available stock items to the vast majority of UK mainland addresses. Please remember to check with us first for a physical stock check if next day delivery is important to you.

UK ORDERS:  We despatch the bulk of our UK mainland items on a 24 hour service – Free of Charge.  Free delivery also applies to the Isle of Man, Isle of Wight, the Scilly Isles, the Scottish highlands and Islands, the Channel Islands and Northern Ireland but may take a day or so longer. Smaller items are delivered using Royal Mail recorded delivery or special delivery. Larger items are delivered using a courier service such as Interlink Express, DPD, UPS or DHL. 

INTERNATIONAL ORDERS: We offer competitive rates which can be confirmed by email. Please just ask – we will need a full delivery address and telephone number. Smaller items are delivered using Royal Mail Small Packets Airmail with International Tracked and/or Signed depending on value of item and availability of the service. Larger International shipments are sent by insured and tracked services using DPD, DHL or UPS. If there are any delays due to specific customs regulations, etc, you will be contacted by Hifisound or by the courier with a request for any further information required. Customs duties do not apply for shipments into any EU country (for a full list please refer to the EU Country List). Customs duties can apply for countries outside of the EU. Customers in these countries are responsible for all taxes and duties incurred when the items enter their country.

Be the first to review Pathos Acoustics Logos MKII Integrated Amplifier. Write a review ›